Samsung SMT-i5220S Quick Reference Manual

SMT-i5220S Quick Reference Guide
SCM Default Feature Codes
SCM
Default Feature Codes
While the most frequently used features appear as dedicated buttons on your phone, there are a
host of additional features that can be used by dialing the default codes listed in the table below.
Some feature codes require an extension, group number or orbit number. When using these
codes, replace the letter X with the appropriate digits. For example; to pick up a ringing call at
extension 2205, us the Direct Call Pickup code *0X# where X is 2205. User dials *02205#
Feature
All Feature Clear
Auto Answer Mode - Cancel
Auto Answer Mode - Set
Auto Retry of Busy Number - Cancel
Auto Retry of Busy Number - Set
Barge-In with Tone
Barge-In without Tone
Callback - Cancel
Callback - Set
Call Forward All - Cancel
Call Forward All - Set
Call Forward Busy - Cancel
Call Forward Busy - Set
Call Forward Busy/No Answer - Cancel
Call Forward Busy/No Answer - Set
Call Forward No Answer - Cancel
Call Forward No Answer - Set
Call Forward Clear All
Note: The system administrator may have set your system up so users do not need to
dial the #. If so you can ignore the # in the code.
Condition Phone Status Indicator
Busy Steady RED
Ringing Flashing RED
Voice Message Flashing GREEN
Version 1.1
Code Feature
*99# Call Park Extension
*430# Call Park Orbit
*431# Conference
*170# Conference on Answer
*171# Direct Call Pickup
*23X# DND - Cancel
*24X# DND - Set
*160# DND Override
*161# Group Call Pickup
*610# Group Call Forward - Cancel
*611X# Group Call Forward - Set
*620# In/Out of Hunt Group - In
*621X# In/Out of Hunt Group - Out
*640# Station Paging
*641X# Voice Mail Access
*630# Voice Mail Memo
*631X# Voice Mail Transfer
*60#
4/2014
SMT-i5220S IP Phone Quick Reference Guide
For more information on your phone settings and features see the SMT-i5220S User Guide
Code
*11#
*10X#
*89#
*81X#
*0X#
*400#
*401#
*25#
**#
*680X#
*681X#
*531X#
*530#
Name
*55#
*88# Phone status indicator
##
4 Soft buttons
*87#
24 Programmable buttons
Conference button
Transfer button
Hold button
UC dial
Navigation Ring &
OK Button
Microphone
Dial button
Speaker button
Headset button
Volume button
Mute button
Service button
Message button
Phonebook button
LCD screen
Handset
Function
Shows the phone's status.
Selects function from the LCD soft menus
Can assign various features with LED indication
Makes a conference
Transfer calls.
Holds a call temporarily without hanging up
L> Call Forward C>idle position R >DND
Move Left/Right/Up/Down in the display
Press center OK button to make a selection
Mic. When using speakerphone
Enters numbers and characters
Toggles the Speakerphone on or off
Toggles the Headset on or off
Set Volume for Ringing, Handset, Speaker
Toggles the microphone on or off
Displays the UC service menus
Displays the message menu
Displays phone book lists
Shows call info, menus and status icons
Use for private conservations
SCM
Samsung Communication Manager