Access Codes; Phone Password - Samsung SGH-D600 User Manual

Solving problems
No number is dialled when you recall a
Contacts entry
• Check that the number has been stored correctly, by
using the Contacts Search feature.
• Re-store the number, if necessary.
If the above guidelines do not help you to solve the
problem, take note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
192

Access codes

There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
When requested for any of the codes explained below,
enter the appropriate code (displayed as asterisks) and
press the OK soft key. If you make a mistake, press the
C key one or more times until the incorrect digit is
cleared and then continue entering the correct code.
The access codes, except for the PUK and PUK2 codes,
can be changed using the Security menu (Menu 9.7).
See page 184 for further details.
Important! Avoid using access codes resembling
emergency numbers, such as 112, so that
you do not accidentally dial an emergency
number.

Phone password

The Phone Lock feature uses the phone password to
protect your phone against unauthorised use. The phone
password is supplied with the phone and is preset to
"00000000" at the factory.
To See
activate/deactivate the page 185 (Menu 9.7.3).
Phone Lock feature
change the phone page 185 (Menu 9.7.4).
password
193