Samsung SGH-D600 User Manual page 64

Messages
Email address: enter your e-mail address.
SMTP server: enter the IP address or domain name of
the server to be used for sending messages. Your e-mail
service provider can give you this information.
SMTP port: enter the SMTP port number. Your e-mail
service provider can give you this information.
Protocol type: specify an e-mail protocol type for the
incoming server, either POP3 or IMAP4. Contact your
e-mail service provider for more information.
The remaining options depend on the protocol type
setting.
When the protocol type is set to POP3:
POP3 server: enter the IP address or domain name of
the server to be used for receiving messages. Your e-
mail service provider can give you this information.
POP3 port: enter the POP3 port number.
APOP login: when this option is checked, you can
connect to the server by using the APOP login scheme.
User ID: enter your e-mail ID.
Password: enter your e-mail password.
When the protocol type is set to IMAP4:
IMAP4 server: enter the IP address or domain name of
the server to be used for receiving messages.
IMAP4 port: enter the IMAP4 port number.
Retrieve headers: set the number of headers you will
retrieve from the server.
Retrieve attachments: when this option is checked, you
can receive attachments with e-mails from the server.
User ID: enter your e-mail ID.
Password: enter your e-mail password.
124
Email profile
You can configure various network settings that are
required when you send or receive e-mails.
Note: When an e-mail is being sent or retrieved from the
e-mail server, you are unable to change the e-mail
profile settings.
The following options are available:
Current profile: allows you to select one of the profiles.
Profile setting: you can configure up to 5 e-mail
profiles. For each profile, the following options are
available:
Profile name: enter the name that you wish to assign to
the e-mail server.
APN: enter the access point name used for the address
of the GPRS network.
Login ID: enter the User ID required to connect to the
GPRS network.
Password: enter the password required to connect to the
GPRS network.
DNS1: enter the primary address required to connect to
the GPRS network.
DNS2: enter the secondary address required to connect
to the GPRS network.
Messages
125