Using Abc Mode; Using T9 Mode - Samsung SGH-D600 User Manual

Entering text

Using ABC mode

Use the 1 to 0 keys to enter your text.
1. Press the keys labelled with the letter you want:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a
different key. When entering the same letter twice or
a different letter on the same key, just wait for a few
seconds for the cursor to move to the right
automatically, and then select the next letter.
Refer to the table below for further details about
available characters:
Characters in the order displayed
Keys
Upper case
Note: The characters available in Alphabet mode may be
different, depending on the selected language.
• To insert a space, press the key.
• To shift case in ABC mode, use the
cases: Lower case (No indicator), Initial capital (
and Capital lock ( ).
• You can move the cursor by pressing the Left or Right
key. To delete letters, press the C key. Press and hold
the C key to clear the entire display.
34
Lower case
key. There are 3
),
Note: To enter or exit an input mode specific to your
country, press and hold the

Using T9 mode

T9 is a predictive text input mode that allows you to key
in any character using single keystrokes. This text input
mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by
pressing the 2 to 9 keys. Press each key only once
for each letter.
Example: To enter "HELLO" in T9 mode,
press the 4, 3, 5, 5, and 6 keys.
The word that you are typing appears on the display.
It may change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
3. When the word displays correctly, go to step 4.
If the word doesn't display correctly, press the 0 key
repeatedly to display alternative word choices for the
keys that you have pressed.
Example: Both "OF" and "ME" use the 6 and 3 keys.
The phone displays the most commonly
used choice first.
4. Insert a space by pressing the
entering the next word.
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word
you want to add, press the 0 key to display the
alternative words.
2. When there are no more alternative words, the
display shows Spell on the bottom line. Press the
Spell soft key or the key.
Entering text
key.
key and start
35