Table of Contents
Advertisement
2.5
After Installing the Controller
Figure 2.2
Connecting a ServeRAID M5110 Controller Internal
Connector to a Drive Backplane
Step 6. Replace the server cover.
Step 7. Slide the server into the rack.
Step 8. Reconnect the power cords and any cables that you removed.
Step 9. Turn on the peripheral devices and the server.
After the you install the controller, you must configure it and install the
operating system driver. The ServeRAID-M Software User's Guide
instructs you on the configuration options and how to set them on your
controller. The ServeRAID-M Device Driver Installation User's Guide
provides detailed installation instructions for operating system drivers.
After Installing the Controller
3_01278-00
2-7
Advertisement
Table of Contents
