Kenwood DNX8170DABS Instruction Manual page 8

Basic Operations
Number Name
Disc insert
8
slot
SD card slot
9
SI
10
DNX5170DABS/ DNX5170BTS/ DNX317DABS/ DNX317BTS
5
6
7
8
9
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
– DNX5170DABS/ DNX5170BTS:
– DNX317DABS/ DNX317BTS:
If above icon is showed, read the article applicable to the unit you use.
Number Name
Disc insert
1
slot
G
2
SI
3
Remote
4
Sensor
HOME
5
8
• A slot to insert a disc media.
• A slot to insert an SD card.
• You can play audio/visual file in the card. *
• An SD card slot for upgrading the map. For how to upgrade the map, refer to the
instruction manual of the navigation system.
* If the map update file remains in the SD card, you cannot play audio/visual file.
• This indicator flashes when the vehicle ignition is off (P.11). (Only for
4 3 2
• A slot to insert a disc media.
• Ejects the disc.
• To forcibly eject the disc, press it for 2 seconds and touch [Yes] after the message is
displayed.
• This indicator flashes when the vehicle ignition is off (P.11).
• Receives the remote control signal.
• Displays the HOME screen (P.14).
• Pressing for 1 second turns the power off. *
• When the power off turns the power on.
* The function of the button when held varies depending on the "Manual Power OFF"
setting. (P.65)
Motion
1
Motion
)