System Setup; User Interface Setup - Kenwood DNX8170DABS Instruction Manual

System Setup

NOTE
• Each operation in this section can be started from
the multi function menu.
1
Press the [MENU] button.
Popup menu appears.
2
Touch [SETUP].
See the following section for each
setting.
• Set up AV (P.68)
• Set up display (P.66)
• Set up the user interface (P.63)
• Set up camera (P.59)
• Set up special (P.65)
• Set up Bluetooth (P.50)
• Set up security (P.11)
• Set up navigation (P.21)

User Interface Setup

You can setup user interface parameters.
1
Press the [MENU] button.
Popup menu appears.
2
Touch [SETUP].
SETUP screen appears.
3
Touch [User Interface].
User Interface screen appears.
4
Set each item as follows.
Steering Remote Controller
Sets the desired function in the steering
remote controller. (Contact your KENWOOD
dealer for details.)
Beep (
Turns the key touch tone on or off.
Default is "ON".
Beep Volume (
Sets the sound volume of the key touch
tone.
"0" (Off ) – "3" (Default) – "5"
Vehicle Adaptor Information*
Displays the vehicle information.
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
Beep for Parking distance control*
Sets whether to generate a warning tone
when the onboard proximity sensor detects
a human or object.
Consult your KENWOOD dealer for details.
Parking Distance Display*
You can display information about obstacles
around the car.
ON: Always displays information.
Dyn. (Default): Displays information when
the sensor detects obstacles.
OFF: Cancels.
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
Setting Up
)
)
1
1
1
63
English