Panasonic et-jpc100bu Installation Instructions Manual page 24

Installation (continued)
Holes
Power supply unit
Image of the adapter cover after attachment is complete
24 - ENGLISH
Tab
ⅱ
ⅰ
Adapter cover
4) Close the connector secure lock.
 While the string is hooked onto the cover, push
until the tabs of the connector secure lock click
into place.
Take care not to trap the string with a tab.
 The string is for preventing the adapter cover
from becoming detached and dropping Make
sure that it is hooked onto the connector secure
lock.
5) Attach the adapter cover.
 While aligning the protrusion at the bottom
center of the adapter cover with the groove (i),
push the tabs on the left and right at the top of
Tab
the adapter cover into the holes until they click
into place (ii).
Take care not to trap the string in the adapter
cover.