Toro 74405FR Operator's Manual page 39

Problem
Uneven cutting height.
The blades do not rotate.
Possible Cause
1. The blade(s) is not sharp. 1. Sharpen the blade(s).
2. A cutting blade(s) is/are
bent.
3. The mower is not level.
4. An anti-scalp wheel is
not set correctly.
5. The underside of the
mower is dirty.
6. The tire pressure is
incorrect.
7. A blade spindle is bent.
1. The drive belt is worn,
loose or broken.
2. The drive belt is off of the
pulley.
3. The mower belt is worn,
loose, or broken.
39
Corrective Action
2. Install a new cutting
blade(s).
3. Level the mower
from side-to-side and
front-to-rear.
4. Adjust the anti-scalp
wheel height.
5. Clean the underside of
the mower.
6. Adjust the tire pressure.
7. Contact an Authorized
Service Dealer.
1. Install a new drive belt.
2. Install the drive belt
and check the adjusting
shafts and belt guides for
the correct position.
3. Install a new mower belt.