Table of Contents
Advertisement
Figure 14
1. Cam lock
2. Lever
Positioning the Flow Baffle
The following figures are only recommendations for
use. Adjustments will vary by grass type, moisture
content, and height of grass.
Note: If the engine power draws down and the mower
ground speed is the same, open up the baffle.
Position A
This is the full rear position (see Figure 15). The
suggested use for this position is a follows.
• Use for short, light grass mowing conditions.
• Use in dry conditions.
• For smaller grass clippings.
• Propels grass clippings farther away from the
mower.
3. Rotate cam to increase or
decrease locking pressure
4. Slot
Position B
Use this position when bagging (Figure 16).
19
Figure 15
Advertisement
Table of Contents
