Table of Contents
Advertisement
Quick Links
PETROL
WATER
BLASTER
5.5hp - 2800psi
INSTRUCTION MANUAL
SPECIFICATIONS
Engine Power:
5.5hp
Engine Displacement:
163cc
Engine Type:
4-Stroke OHV
Working Pressure:
145bar/2100psi
Maximum Pressure:
193bar/2800psi
Flow Rate:
8L/min
Fuel Tank Capacity:
3.6L
Weight:
33kg
ozito.com.au
1
WHAT'S IN THE BOX
Petrol Water Blaster
8m High Pressure Hose
Gun & Lance
Spray Nozzles
Solid Rubber Wheels
Spark Plug Spanner,
Screwdriver, Cleaning
Needle & Breather
PWB-2800
Advertisement
Table of Contents
Related Manuals for Ozito PWB-2800
Summary of Contents for Ozito PWB-2800
- Page 1 Engine Power: 5.5hp Spray Nozzles Engine Displacement: 163cc Engine Type: 4-Stroke OHV Working Pressure: 145bar/2100psi Maximum Pressure: 193bar/2800psi Flow Rate: 8L/min Fuel Tank Capacity: 3.6L Weight: 33kg Solid Rubber Wheels ozito.com.au Spark Plug Spanner, Screwdriver, Cleaning Needle & Breather PWB-2800...
-
Page 2: Know Your Product
KNOW YOUR PRODUCT SETUP & PREPARATION MOBILE PETROL WATER BLASTER 1. Lance 7. Fuel Shut Off 1. ASSEMBLY 2. Gun 8. Fuel Tank 3. Air Filter 9. Fuel Cap 4. Choke 10. On/Off Switch 1. To attach the 5. Recoil Starter 11. -
Page 3: Fuel And Oil
3. CONNECTIONS 2. FUEL & OIL Hose & Gun Assembly Fuel WARNING!: PETROL IS VERY FLAMMABLE. AVOID SMOKING OR CAUSING ANY SPARKS OR FLAMES NEAR FUEL. SELECT AN OPEN OUTDOOR AREA FOR FUELLING AND MOVE AT LEAST 3M AWAY FROM THE FUELLING POINT BEFORE STARTING THE MOTOR. -
Page 4: Operation
OPERATION 4. PRE-START PROCEDURE Water Supply 1. Ensure water supply is connected. 4. Run water through your garden hose to remove any foreign matter before attaching to the pump.. 2. Ensure water supply is turned on. 5. Attach garden hose to the inlet on the pump. Note: A plastic filter is fitted to the inlet preventing any debris from entering the pump. - Page 5 WITHOUT CIRCULATING WATER THROUGH THE PUMP AS THIS COULD LEAD TO OVERHEATING AND DAMAGE. 7. Set choke to OPEN position. 7. The pump has a pressure relief valve which will release a small amount of water in the event of overheating. PWB-2800...
-
Page 6: Troubleshooting
Damage may occur to painted surfaces if the soap is allowed to dry on the Bunnings Warehouse. surface. For further information, or any parts not listed here, visit www.ozito.com. • Hold the nozzle far enough away from surface to prevent damage to the au or contact Ozito customer service surface. -
Page 7: Maintenance
MAINTENANCE Recommended Check & Maintenance Chart Every Operation/ After 20 Hours After 50 Hours After 100 Hours Time Item Daily or 1 Month or 3 Months or Yearly Inspect and Tighten All Nuts and Bolts Engine Oil (top up if required and (only required after first check for leaks) 20 hours / 1 month of use) - Page 8 Tool: Mobile Petrol Water Blaster SPARE PARTS Model No. PWB-2800 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Description Part No. High Pressure Hose SPPWB2800-07 High Pressure Gun...
-
Page 9: Safety Instructions
SAFETY INSTRUCTIONS RISK OF EXPLOSION OR FIRE conditions will reduce personal injuries. c) Remove any adjusting key or wrench before turning the tool on. A wrench or a What can happen: key that is left attached to a rotating part of the petrol tool may result in personal injury. •... -
Page 10: Warranty
• Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 1212...
Need help?
Do you have a question about the PWB-2800 and is the answer not in the manual?
Questions and answers
What spark plug does it take?