Ozito PWE-1300 Instruction Manual

Ozito PWE-1300 Instruction Manual

High pressure cleaner 1300w 1450 psi

Advertisement

HIGH PRESSURE
CLEANER
1300W 1450 PSI
INSTRUCTION MANUAL

SPECIFICATIONS

Input:
220–240V ~ 50Hz
Motor:
1300W
Rated Flow:
5.7 l/min
Max. Flow:
6.8 l/min
Permissible Pressure: 10 MPa (1450 psi)
Rated Pressure:
7 MPa (1015 psi)
Inlet Water Pressure: 0.6 MPa (87 psi) max.
Water Supply Temp.: 40ºC max.
IP Rating:
IPX5
Weight:
4.3kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: bearings,
o-rings.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
Failure to perform maintenance as set out within the
instruction manual.
If the tool is disassembled or tampered with in any way.
Professional, industrial or high frequency use.

WHAT'S IN THE BOX

High Pressure Cleaner
3m High Pressure Hose
Gun & Lance
Deck & Patio Cleaner
PWE-1300
1215

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PWE-1300 and is the answer not in the manual?

Questions and answers

Roger Penn
April 23, 2025

What size are the ends on pressure hose please

Summary of Contents for Ozito PWE-1300

  • Page 1 Weight: 4.3kg ozito.com.au Adjustable Spray Nozzle, Detergent Spray Bottle PWE-1300 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS The benefits provided under this warranty are in addition WARRANTY YOU MUST RETURN THE PRODUCT to other rights and remedies which are available to you at law.
  • Page 2 KNOW YOUR PRODUCT SETUP & PREPARATION HIGH PRESSURE CLEANER 1. ASSEMBLY 1. Accessory holder 4. Quick connect system 2. Water inlet connector 5. On/Off switch 3. High pressure hose connector 6. Carry handle WARNING! ENSURE THE TOOL IS SWITCHED OFF AND DISCONNECTED FROM THE POWER SUPPLY BEFORE PERFORMING ANY OF THE FOLLOWING PROCEDURES.
  • Page 3: Water Supply

    For use only with mains pressure water when a backflow preventer is lance to installed on the inlet of the pressure washer. For further information the gun by contact Ozito Customer Service. pushing and twisting. 1. Run water through your garden hose...
  • Page 4: Spray Gun

    OPERATION OPERATION On/Off switch Detergent spray bottle CAUTION! THIS PRODUCT MUST BE USED WITH A Fill the detergent spray bottle with suitable cleaning agent. RESIDUAL CURRENT DEVICE RATED 30mA OR LESS. Note: Use only cleaning agents which are expressly suitable for high pressure cleaners.
  • Page 5 4. Release built up water pressure by squeezing the trigger. 5. Turn water supply off. 4. Squeeze trigger on the gun until there is a steady flow of water from the nozzle. 6. Switch off the mains power supply and remove the electrical plug. PWE-1300...
  • Page 6 MAINTENANCE 6. TROUBLE SHOOTING 7. CLEANING & MAINTENANCE Problem Cause Solution IMPORTANT! BEFORE CLEANING YOUR HIGH PRESSURE CLEANER OR CARRYING OUT ANY MAINTENANCE The high pressure 1. No power supply 1. Check the power cleaner does not start supply, the power PROCEDURE, MAKE SURE THAT THE MOTOR IS OFF AND plug and the THE TOOL DISCONNECTED FROM THE POWER SUPPLY...
  • Page 7 Spare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse. For further information, or any parts not listed here, visit www.ozito.com.au or contact Ozito Customer Service: Australia 1800 069 486 New Zealand 0508 069 486...
  • Page 8 ELECTRICAL SAFETY WARNING! Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New When using mains-powered tools, basic safety precautions, including Zealand. the following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage.

Table of Contents

Save PDF