Connecting To External Devices - Samsung HT-F450BK User Manual

Connections
Method 2 Connecting to a TV with a Video Cable - Good Quality
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack on your TV.
| NOTE |
\
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection
systems and the picture will be distorted on the television.
Using Anynet+(HDMI-CEC) (Samsung products only)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control.
Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable.
| NOTE |
\
The Anynet+ function supports some buttons of the remote control.
\
This function is not available if an HDMI cable does not support CEC.
\
Please check the Anynet+ logo (If your TV has an Anynet+ logo, then it supports Anynet+ function.)

Connecting to External Devices

To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the
mode changes in this order : DVD/CD
Red
R
White
W
External Devices
Method 1 AUX 2 : Connecting an External Analog Component
Connect AUX IN 2 (Audio) on the back of the product to the Audio Out of the external Analog component.
 Select the AUX 2 mode.
| NOTE |
\
Be sure to match the colors of the connecting jacks.
\
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this
product.
\
If no button actions for more than 8 hours in AUX mode, the power will automatically turn off.
Method 2 OPTICAL : Connecting an External Digital Audio Component
Connect the DIGITAL AUDIO IN (OPTICAL) on the back of the product to the Digital Output of the external digital
component.  Select the D.IN mode.
\
If no OPTICAL signal for more than 25 minutes, the product will automatically turn off.
14
|
English
D.IN BT(OPTION) AUX 1
AUDIO OUT
DIGITAL OUT
AUX 2 USB FM
Method 1
(Cable not supplied.)
VIDEO
AUX IN 2
OUT
FM ANT HDMI OUT
OPTICAL
DIGITAL
AUDIO IN
(Cable not supplied.)
Method 2