Samsung HT-F450BK User Manual page 12

Connections
In case of HT-F450BK/HT-F450RK
Surround Speaker (R)
Installing the Speakers on the Tallboy Stand
* HT-F453BK/HT-F453RK only - Front Speakers
* HT-F455BK/HT-F455RK only - Front/Surround Speakers
1 . Turn the Stand Base upside-down and connect it to the
Stand.
2 . Use the driver to combine the screws on the 3 marked holes.
| CAUTION |
\
When you use a torque screwdriver, be careful not to put
excessive force. Otherwise, it runs idle or can be damaged.
(torque screwdriver- below 15 kg.f.cm)
3 . Straighten a supplied speaker wire to the gravity direction
and put in the hole on the center of Stand Base.
4 . Connect the upper Speaker to the assembled Stand.
5 . Insert a screw clockwise into the hole on the rear of the
speaker using a screwdriver. And then connect a speaker
cable.
6 . This is the appearance after the speaker is installed.Follow
this steps to install other speaker.
12
|
English
Front Speaker (R)
115
VOLTAGE
SPEAKERS OUT
SEL．
FA NET
(Only For Service)
SURROUND SUBWOOFER
Subwoofer
Center Speaker
Front Speaker (L)
VIDEO
AUX IN 2
OUT
FM ANT HDMI OUT
OPTICAL
DIGITAL
SURROUND AUDIO IN
Surround Speaker (L)
Refer to page 11 for the speakers of
HT-F453BK/F453RK/F453HBK/ F453HRK/
F455BK/F455RK.
Stand Base
1
Stand
3
5
2
4
Speaker
Stand
6