Table of Contents
Advertisement
Installing the Speakers on the Half Tallboy
Stand
* HT-F453HBK/HT-F453HRK only - Front Speakers
Turn the Stand Base upside-down and connect it to the
1 .
Speaker.
Use the driver to combine the screws on the 3 marked holes.
2 .
Installing a speaker is finished. Follow the same steps to install
other speakers.
If you want to adjust the height of the speaker, loosen a screw
3 .
on the rear of the speaker base first.
Pull up the speaker in the arrow direction. (Be careful as an
4 .
excessive force may result in a physical damage.)
Fit the speaker in a height adjusting a hole, and then use a
5 .
screw to fasten a speaker.
6 .
This is appearance of after the speaker is installed and height
adjusted. To adjust height of other speakers, follow the step
3 ~ 5.
Connecting to a TV
Select either Method 1 or Method 2.
• If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote
control, and then select the correct external source from the TV's source list (HDMI, Video In, etc.) to view video
from the home cinema.
SPEAKERS OUT
SURROUND
SUBWOOFER
SURROUND
Method 1 Connecting to a TV with an HDMI Cable - Best Quality (Recommended)
Connect an HDMI cable (option) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.
VIDEO
AUX IN 2
OUT
FM ANT
HDMI OUT
OPTICAL
DIGITAL
AUDIO IN
Stand Base
1
2
Speaker
3
4
5
6
Method 2
Method 1
or
13
|
English
Hide quick links:
Advertisement
Table of Contents
