Function Keys; Moon Phase Symbols; Manual Settings - SkyScan 86715 Instruction Manual

FUNCTION KEYS

The atomic clock has four easy to use keys:
SET key : To enter into the set mode for the following functions: time zone, DST ON/OFF (daylight saving
time), language, hour, minute, year, month, day, weekday, 12/24 hour, ºC or ºF temperature
display
+ key : To toggle between the seconds, temperature or weekday display
To change any values in manual set mode
ALM key: To enter into the alarm set mode
To set the alarm ON/OFF
SNZ key : To activate the snooze function during alarm
To display the alarm time in normal mode display
To exit the setting modes

MOON PHASE SYMBOLS:

The atomic clock automatically calculates and updates the moon phase diagram on LCD2. The phase display
will change approximately every 2 days, 11 hours. Whenever the date or time is changed manually, the atomic
clock will display the updated moon phase within a few minutes. Twelve stages of the moon's phases are
represented.
New Moon Small Waxing Large Waxing First Quarter Small Waxing
Crescent Crescent
FullMoon Large Waning Small Waning Last Quarter Large Waning
Gibbous
Note: The moon phase visible in the sky is noted by a darkening of the LCD screen. Therefore, a full moon is a
complete dark circle.

MANUAL SETTINGS

Note:
If the atomic clock has already successfully received the WWVB time signal and displays the correct time
and date, then the Manual settings can be skipped.
After completion of the above described procedures in "Setting up" the manual setting modes can be entered
by pressing and holding the SET key for 3 seconds. The following settings can now be programmed:
 Time zone setting
 DST ON/OFF
 Language display setting
 Manual time setting
 Year setting
 Month setting
 Date setting
 Weekday setting
 12/24 hour time display setting
 ºC or ºF setting
Gibbous
Large Waxing
Gibbous Gibbous
Small Waning
Crescent Crescent