2. Inspection before Use
Prior to use, the probe must be carefully inspected that they are
appropriate for use. If you find any damage, do not use the probe and
immediately contact a service support.
2.1 Inspection for Material Surface
1) Visually inspect the surface of the probe head, housing and cable
for any crack, scratch or denaturalization.
2) Visually inspect the surface of the Magnetic sensor attachment and
the
Spacer
denaturalization.
2.2 Inspection of the Biopsy Attachment
1) Check that any foreign article is not in the needle groove. Confirm
that the Needle insert can be mounted to the Needle guide.
Needle insert
Needle groove
Fig.3 Needle Groove
2) Confirm that the biopsy attachment can be mounted to the probe and
detached from it.
for
EZU-RV2S
Needle guide
Needle groove
for
any
crack,
Needle insert
Fig.4 Biopsy Attachment Assembly
-6-
deformation
or
Needle guide
Q1E-EP1245