Inspection Before Use; Inspection For Appropriate Connection; Inspection For Material Surface - Hitachi EUP-B512 Instruction Manual

2

Inspection before Use

Prior to use, the probe must be carefully inspected that it is
appropriate for use.
2.1

Inspection for Appropriate Connection

2.1.1 Confirm that the system is correctly operating. Refer to
the instruction manual for the ultrasound diagnostic
scanner.
2.1.2 Do not attach or connect unauthorized devices nor
instruments on the probe, such as unauthorized biopsy
attachments.
2.2

Inspection for Material Surface

2.2.1 Visually inspect that the surface of the probe and head,
housing, the cable and the connector for any crack, scratch
or denaturalization. If you find any damage, do not use
the probe, and immediately contact a service support.
2.2.2 Visually inspect that the surface of the Magnetic sensor
attachment and the Spacer for EZU-RV2S for any crack,
deformation or denaturalization. If you find any damage,
do not use them, and immediately contact a service support.
- 4 - Q1E-EP0780