Reproducing Welding Conditions - Panasonic YC-300BP2YAF Operating Instructions Manual

Operation

6.3.8 Reproducing welding conditions

• Set "FUNCTION" button to "PLAY."
Note
1
The screen on the right
appears on the digital amme-
ter.
• Turn the JOG dial and select a program number to
be reproduced.
* The stored program numbers are indicated in
2
ascending order. (If there is no program stored, the
display is still indicating "P--" when turning the
JOG dial.
3 • Press the JOG dial to reproduce.
• To cancel the reproduction or if there is no program to reproduce, set "FUNCTION" button to "WELD".
38
JOG dial
"FUNCTION" button
Operation
• Welding can be done by reproduction of any desired
condition selected from the stored welding conditions.
• A reproduced welding condition can be changed as
desired. (Once changed, it turns to be different from the
original condition any more.)
• To store any revised welding condition, use a new pro-
gram number, or store it with the original number by
overwriting unless any inconvenience is caused.
Set-value display
(In case of reproducing
"P01")
LCD display
JOG to Sel. No.
Press to Confirm
OMCTT5639E09