2Extension Cable (Available On Request) - Panasonic YC-300BZ3YHD Operating Instructions Manual

4.3.2 Extension cable (available on request)

Use an extension cable when the welding torch cable is
not long enough. (It is connected between the welding
torch and this product.)
< Note >
Extension cables cannot be interconnect. (Use one
extension cable only.)

Make sure to lay out an extension cable in an extended
form. (Using an extension cable in a collide form may be
a cause of unstable arching.)

To use an extension cable, it is necessary to purchase
one each of the terminal adapter (CWC00180) and the
control cable assembly (TWX00018) separately.
Applicable torches
YT-15TS1
YT-15TS1C1
YT-20TS1TAG*
YT-20TS1TAH*
Air-cooling
YT-20TS1
YT-20TS1C1
YT-208T
YT-208TC1
YT-30TSW1TAG*
YT-30TSW1TAH*
YT-30TSW1
YT-30TSW1C1
Water-cooling
YT-208TW
YT-208TWC1
YT-308TW
YT-308TWC1
*1: Special torch
*2: Refer to the "Example of extension cable connection" on the next page.
OMCTT5621E18
Cable length
5 m
TWU15125
1
1
TWU20131
1
1
TWU30132

When connecting the special torch to an extension
cable, remove the replacement cable clamp attached to
the welding machine side of the special torch. (Remove
the rubber cover of the replacement cable clamp, and
the screw appears. Remove that screw, and the
replacement cable clamp comes off.
< Note >
The torch connection side of the extension cable
employs a screw connection. As the special torch
with the replacement cable clamp removed also
employs a screw connection, it can be connected
with the extension cable)
Extension cable
10 m
TWU15126
TWU20132
TWU30133
Configuration
15 m
TWU15127
TWU20133
2
TWU30134*
15