Table of Contents
Advertisement
"Initial setup" menu is provided to make settings of the following items: "Language", "DVI setup", "Start mode", "No operation
shut off timer" and "Reset"
1
Press the MENU button and the On-Screen Menu will appear.
2
Press the
e e d d
buttons to select "Initial setup" and then press the
OK button. "Initial setup" menu will appear.
3
Press the
e e d d
buttons to select the item that you want to setup,
and make settings for the selected item by pressing the 78
buttons.
Language
Select a language by pressing the 78 buttons among English,
French and Spanish.
DVI setup
This function is used to set HDCP for DVI input. Select "PC" or
"HDCP" by pressing the 78 buttons according to the input signal.
PC
···· Select PC when the input signal is without HDCP
HDCP···· Select HDCP when the input signal is with HDCP
NOTE :
HDCP (High-bandwidth Digital Content Protection) is a system for protecting
digital entertainment content delivered by DVI (Digital Visual Interface) from
being copied.
The specification of HDCP is decided and controlled by Digital Content
Protection, LLC. Should the specification be changed, this Plasma Monitor
may not display the digital content protected by HDCP.
Start mode
This function is used for selecting the start-up input mode in turning
on the Plasma Monitor. Select an input mode which you want when
turning on the Plasma Monitor among "AV1", "AV2", "AV3",
"Component1", "Component2", "PC" and "DVI-D" with the 78
buttons. When "Off" is selected, the last selected input mode is
observed when turning on the Plasma Monitor.
No operation shut off timer
This function turns off the Plasma Monitor automatically when there
is no operation of the Remote Control Unit or the Front Control for 3
hours.
With this function "On", while no operation continues for 3 hours, the
message "No operation : Power off" will be displayed for about 1
minute, and the Plasma Monitor will shut off automatically (in
standby mode).
Reset
This function returns all setting values to the factory default settings.
Press any of the 78 buttons or the OK button and then the next
dialog box will appear. Select "Yes" and press the OK button to
make all the adjustments that you have made be canceled and
return to the factory default settings.
INITIAL SETUP
INITIAL SETUP MENU
Picture adjustment
Sound adjustment
Screen adjustment
Picture setup
Initial setup
PC mode adjustment
Screen saver
Information
Select
OK
O K
Return
M E N U
Exit
STATUS
Initial setup
Language
English
DVI setup
HDCP
Start mode
Off
No operation shut off timer
Off
Reset
Setup
Select
7 8
OK
Return
Exit
STATUS
M E N U
Initial setup
Returen to factory settings
Yes
No
7 8
Select
O K
OK
STATUS
Return
M E N U
Exit
SETTING
35
Advertisement
Table of Contents
