Flexpay Control Board [Fcb (M11930K001)] - GILBARCO VEEDER-ROOT Encore 700 S Start-Up And Service Manual

Service

FlexPay Control Board [FCB (M11930K001)]

The FCB provides the functions of CRIND device. The FCB houses the secure device that
protects credit and debit card PIN information. The FCB is located on the main door directly
behind the CRIND display (see
housing. It will tamper the security and destroy the board. The display jumper (on rear side of
FCB) must be set before the installation of the FCB. Set according to the CRIND display size
in the unit (see
Figure 4-13: FCB (M09115A001)
P603 is Dimming only
for 10.4, Power and
Dimming for 5.7
Display
Jumper
Note: J1 position = 1
Jumper IN = 10.4" color
Jumper OUT = 5.7" color
Page 4-16
Figure
Figure 4-13).
P411 is 24 VDC Feed from TB-3
on M07555 Power Supply
P412 USB to
PIP or Beep
Beeper Control Line
P602 
P601
(Video OUT)
MDE-4902E Encore® 700 S Start-up and Service Manual · February 2018
FlexPay Control Board [FCB (M11930K001)]
4-13). Do not separate the FCB from its black plastic
P504/P505 Speaker Connections P504 is Mono
P402 Communication to SCR,
FlexPay EPP, and HIP
Rear View
P502 USB to
CRIND Printer
P503 CAT-5
Cable to HIP
P506 to Softkeys,
Door Sense P2111
on Door Node, and
Auxiliary Keypad