Regulatory Compliance and Safety Information
Standards Compliance
The product bears the CE mark. In addition it is in compliance with the following other safety and
EMC standards.
Note. All hardware switching modules used in an OmniSwitch switch comply with Class A
standards. Modules with copper connectors meet Class A requirements using unshielded (UTP) cables.
Safety Standards
US UL 60950-1
•
IEC 60950-1 Health and Safety
•
CAN/CSA-C22.2 No. 60950-1-03
•
NOM-019 SCFI, Mexico
•
AS/NZ TS-001 and 60950:2000, Australia
•
UL-AR, Argentina
•
UL-GS Mark, Germany
•
CU, EAC, Russia
•
EN 60825-1 Laser
•
EN 60825-2 Laser
•
CDRH Laser
•
IEC 60950-1/EN 60950 with all country deviations
•
IEC 60950-1:2005, Second Edition
•
CCC, China
•
ANATEL, Brazil (Contact for availability)
•
BSMI, Taiwan (Contact for availability)
•
KCC, Korea (Contact for availability)
•
In compliance with UL/EN/IEC 62368-1:
This equipment is not suitable for use in locations where children are likely to be present.
OmniSwitch 6360 Hardware Users Guide
April 2021
Standards Compliance
page A-5