Installing Available Rack Mounting Kits; Installing The Os6360-Rm-L Rack Mount Kit - Nokia Alcatel-Lucent OmniSwitch 6360 Hardware User's Manual

Chassis and Power Supplies

Installing Available Rack Mounting Kits

Note. Some factory-installed screws may need to be removed prior to mounting, depending on the kit
being used.

Installing the OS6360-RM-L Rack Mount Kit

A single chassis can also be mounted into a standard 19-inch rack using L-brackets, as shown in the figure
below.
1 Attach rack mount brackets to both sides of the front of the chassis.The long and short bracket can be
mounted on either side of the chassis.
2 Align the holes in the flanges with the rack holes and insert rack mount screws (not provided) through
the bottom hole of each flange and then the top of each flange. Tighten both screws until they are secure
OmniSwitch 6360 Hardware Users Guide
Attach Rack Mount Brackets
Follow the recommended clearance requirements for the
model type being mounted.
Rack-mounting Single Chassis
April 2021
Installing Available Rack Mounting Kits
page 3-29