Advertisement

Quick Links

Mavic Pro User Manual
Calibrating the Compass
It is recommended to calibrate the compass in any of the following situations when flying outdoors:
1. Flying at a location farther than 10 km away from the last flight location.
2. The aircraft hasn't been flown for more than one month.
3. A compass interference warning appears in the DJI GO 4 app, and the warning persists after chang-
ing location.
Restart the aircraft when calibration is complete.
DO NOT calibrate your compass where there is a chance of strong magnetic interference, such
as magnetite, parking structures, and steel reinforcements underground.
DO NOT carry ferromagnetic materials with you during calibration such as cellular phones.
The DJI GO 4 app will prompt you to resolve the compass issue if the compass is affected by
strong interference after calibration is complete. Follow the prompted instructions to resolve the
compass issue.
Calibration Procedures
Choose an open area to carry out the following procedures.
1. Tap the Aircraft Status Bar in the app and select "Calibrate", then follow the on-screen instructions.
2. Hold the aircraft horizontally and rotate 360 degrees. The Aircraft Status Indicators will display a solid
green light.
3. Hold the aircraft vertically, with nose pointing downward, and rotate it 360 degrees around the center
axis.
54
©
2017 DJI All Rights Reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mavic Pro and is the answer not in the manual?

Questions and answers

Summary of Contents for dji Mavic Pro

  • Page 1 DO NOT carry ferromagnetic materials with you during calibration such as cellular phones. The DJI GO 4 app will prompt you to resolve the compass issue if the compass is affected by strong interference after calibration is complete. Follow the prompted instructions to resolve the compass issue.
  • Page 2: Auto Takeoff And Auto Landing

    3. a. When Landing Protection determines that the ground is suitable for landing, the Mavic Pro will land gently. b. If Landing Protection determines that the ground is not suitable for landing, the Mavic Pro will hover and wait for pilot confirmation.
  • Page 3: Starting/Stopping The Motors

    Stopping the Motors There are two methods to stop the motors. Method 1: When Mavic Pro has landed, push the left stick down , then conduct the same CSC that was used to start the motors, as described above . Motors will stop immediately. Release both sticks once motors stop.
  • Page 4 Video Suggestions and Tips 1. Go through the full pre-flight checklist before each flight. 2. Select the desired gimbal operation mode in the DJI GO 4 app. 3. Only shoot video when flying in P-mode. 4. Always fly in good weather and avoid flying in rain or heavy wind.
  • Page 5 Appendix © 2017 DJI All Rights Reserved.
  • Page 6: Specifications

    Max Hovering Time (0 wind) Avg. Flight Time 21 minutes (general flight, 15% battery left) Mavic Pro Platinum: 9.3 mi (15 km); Mavic Pro: 8 mi (13 km) Max Flight Distance (0 wind) Operating Temperature 32° to 104° F (0° to 40° C)
  • Page 7 Mavic Pro User Manual 78.8° FOV, 28 mm (35 mm format equivalent) f/2.2 Lens Distortion <1.5% Focus from 0.5 m to ∞ ISO Range 100 - 3200 (video), 100 - 1600 (photo) Electronic Shutter Speed 8 s to 1/8000 s Max Image Size 4000×3000...
  • Page 8: Firmware Updates

    Using the DJI GO 4 App Connect the remote controller and the DJI GO 4 app, You will be reminded if a new firmware upgrade is available. To start upgrading, connect your mobile device to the Internet and follow the on-screen instructions.
  • Page 9: Remote Controller Lcd Screen Menu Information

    The flight path can be saved and re-apply in the future. Enable Multiple Flight Mode by launching the DJI GO 4 app > Camera View > > Multiple Flight Mode before using the Intelligent Flight Mode for the first time.
  • Page 10: After-Sales Information

    WHEEL ERR+RE-CTR WHEL Left Dial on the remote controller is not centered. Re-center it. STICK ERR Control stick error. Calibrate the control sticks in the DJI GO 4 app. MECH ERR Remote Controller Error. Calibrate the remote controller in the DJI GO 4 app.
  • Page 11 This content is subject to change. Download the latest version from http://www.dji.com/mavic If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. MAVIC is a trademark of DJI. Copyright © 2017 DJI All Rights Reserved.

Table of Contents