4K videos and 12 megapixel photos, and is capable of both ActiveTrack TapFly making complex shots effortless. Mavic Pro boasts a maximum flight speed of 40 mph (65 kph) and a maximum flight time of 27 minutes*. 1. Gimbal and Camera 9.
, offering a maximum transmission range of 4.3 mi (7 km). An on-board LCD screen keeps you updated on aircraft data, and video from the aircraft to the DJI GO app on your mobile device at up to 1080p at close range, and 720p at longer ranges. The Mavic Pro can also be flown by phone only.
Specifications ● Aircraft Weight 1.62 lbs (734 g) Weight (including gimbal cover)1.64 lbs (743 g) Max Ascent Speed 16.4 ft/s (5 m/s) in Sport Mode Max Descent Speed 9.8 ft/s (3 m/s) Max Speed 40 mph (65 kph) in Sport Mode without wind Max Service Ceiling Above Sea Level 16404 feet (5000 m)
Page 5
Approx. 0.5 lbs (240 g) Net Weight Charging Temperature Range 41° to 104° F (5° to 40° C) Max Charging Power 100 W For more information, read the User Manual: http://www.dji.com/mavic ※This content is subject to change without prior notice.
1. Download the DJI GO App and Watch the Tutorial Videos Search for ‘DJI GO’ on the App Store or Google Play, or scan the QR code to download the app on your mobile device. Watch the tutorial videos at www.dji.com or in the DJI GO App.
3. Charge the Batteries Remove Intelligent Flight Battery Power Outlet Charge Time: Charge Time: 100 - 240V ~1 hour 20 minutes ~2 hours 4. Prepare the Remote Controller Place one end of the RC Unfold the antennas and cable to the end of the slot. the mobile device clamp.
Use your DJI account to activate the aircraft. Activation requires an internet connection. Internet The Mavic Pro can be controlled using the Remote Controller or Virtual Joysticks. ● Select control modes by toggling the Control Mode Switch. Only toggle this switch...
Left Stick Right Stick Before taking off, make sure the Aircraft Status Ready to Go (GPS) Bar in the DJI GO app or on the Remote Controller LCD screen displays 'Ready to Go'. Combination stick command to start/stop the motors...
Page 10
1. Toggle the Control Mode Switch to turn on Wi-Fi 2. Power on the aircraft 3. Launch the DJI GO app and tap the icon on the top right of your screen, then scan the Wi-Fi QR Code on the front arm to start connection 4.
Need help?
Do you have a question about the MAVIC PRO and is the answer not in the manual?
Questions and answers