Setup Of Input/Output Terminal Operation Time; Analog Input Filter - Toshiba TOSVERT VF-AS1 Instruction Manual

7.2.3 Setup of input/output terminal operation time

•Function
The input/output terminal operation time setup function is used to extend response time if there is something
malfunctioning because of noise or chattering of input relay. For each output terminal, delay time at turning on or
off can be set individually.
Setup of response time
Title






: Setting when vector option unit or expansion TB option unit is used.
Note: The minimum setting unit is 2.5ms. Please input the value which omitted below the decimal point of a multiple of
2.5.

7.2.4 Analog input filter

•Function
This function is effective to remove noise from the frequency setting circuit. If operation is unstable because of
noise, increase the time constant of the analog input filter.
Response time setting
Title

Function
Input terminal 1 response time selection (F)
Input terminal 2 response time selection (R)
Input terminal 3 response time selection
(ST)
Input terminal 4 response time selection
(RES)
Input terminal 5-12 response time selection
Input terminal 13~20 response time
selection
Function
Analog input filter  (No filter)~  (Max. filter)
G-9
Adjustment range
 ~  ms
 ~  ms
 ~  ms
 ~  ms
 ~  ms
 ~  ms
Adjustment range
E6581301
Default setting






7
Default setting
