MIMAKI JV300-130 Maintenance Manual page 65

MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > STAGGER ADJUST
Model JV300-130/160 Issued 2014.05.30 Revised
4.2.2 STAGGER ADJUST
 Outline
 It is necessary to perform SLANT adjustment before STAGGER adjustment.
 After adjusting the stagger, adjust the slant.
A pattern for mechanical adjustment of positional deviation of each head is drawn.
Move the head height to the position of 2.0 mm print gap, and select a head to draw the adjusting pattern.
The pattern is drawn in only A (Magenta) raw of each head.
Head 1
Align this row of
each head.
 Procedure
Adjusting Lever
© 2014 MIMAKI ENGINEERING CO.,LTD.
F/W ver.
Adjustment pattern
Head 2
Patterns of effective overlapping and not effective are
1. Move the adjusting lever to the right until the adjusting cam hits
it.
1.00 Remark
printed alternately
Rev.
1.0
1
2
3
4
5
6
7
8
4.2.2 R.1.0 P.1