Advertisement
Error Code List for Induction Cooktops
CODE
CAUSE
Top Sensor
Open Error
Top Sensor
Short Error
IGBT Sensor
Open Error
(Assy-Inverter
Module)
IGBT Sensor
Short Error
(Assy-Inverter
Module)
Touch Button
Short Error
Temperature
Error
Detection
Error
Low Voltage
Error
DC Motor
Locking
Error
Defective top sensor, misplaced wires, or defective PCB.
Resistance of top sensor at room temperature should be:
(7.65KΩ~ 9.34KΩ)
It also occurs when room temperature falls under -10˚C.
Defective top sensor, misplaced wires, or defective PCB.
(Resistance of top sensor at room temperature should be:
(7.65KΩ~ 9.34KΩ)
Defective IGBT sensor, misplaced wires, or defective PCB.
(Resistance of IGBT sensor at 25°C should be: 10kΩ)
It also occurs when room temperature falls under -10˚C.
Defective IGBT sensor, misplaced wires, or defective PCB.
(Resistance of IGBT sensor at 25°C should be: 10kΩ)
Occurs when the control panel touch sensor is shorted
more than 10 seconds.
•Stuff has been left on the control panel.
•Liquid overflows and lands on the control panel.
•More than one key is held down for over 10 seconds.
•Defective Assy-Touch PCB
Occurs when the temperature of cooktop rises very high.
Over
Estimated temperature of the ceramic glass surface is more
than 250˚C.
Ex: an empty cookware is on the working cooktop.
Occurs when the cookware is unsuitable, too small, or if no
Pan
cookware has been placed on the cooking zone.
If suitable cookware is placed, the cooktop will operate
normally.
Occurs when the DC 12V has dropped under 9V.
It may occur due to defects of PCB or LV transformer.
Occurs when the DC Motor cannot operate due to defects
of PCB, wiring or motor blade disturbances.
REASON / SOLUTION
Advertisement
