Advertisement
Microwave Ovens / OTRs Error Code List
Code
Cause
E-5*
E-51
Open
Format
E-53
Error
E-54
Reset Error
E-6*
Sensor
E-61
Open
sensor
E-62
Short
T1 Max Time
E-63
Error
E-6*
Sensor
E-61
Open
sensor
E-62
Short
T1 Max Time
E-63
Error
E-0*
E-01
Door Open
E-02
Time Setting
Error
~05
Operation
E-06
Error
Operation
E-08
Error
Operation
E-09
Error
EEPROM Error
Open circuit, Check wire harness, PCB.
Read/Write Error
Zero not to be set.
Humidity Sensor Error
Sensor open error. Check if there is an unplugged sensor,
loose wire connector, or defective PCB.
Sensor short error. Check if the sensor shorted, or defective
PCB. Replace the sensor if necessary.
Sensor T1 Max Time Error. Check sensor, or defective PCB.
Humidity Sensor Error
Sensor open error. Check if there is an unplugged sensor,
loose wire connector, or defective PCB.
Sensor short error. Check if the sensor shorted, or defective
PCB. Replace the sensor if necessary.
Sensor T1 Max Time Error. Check sensor, or defective PCB.
Door open error. The door opens while it should not be
opened.
Cooking time setting over error.
(2- MWO / 3- Grill / 4- Convection / 5- Combination)
Sensor fails to sense that the swing heater has stopped for
20 seconds during cooking.
Function of MWO starts with spit inserted into cavity inside.
The damper is not set to be positioned for 2 minutes.
Reason/Solution
Others
Advertisement
