❽ Menu Descriptions & Functions [Reset] - Canon LV-7370 User Manual

. Usng On-Screen Menu
❽ Menu Descriptions & Functions [Reset]
Resettng settngs and adjustments [Reset]
The Reset feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
Clearng adjustments and settngs for the current sgnal [Current sgnal]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [Image mode], [Brightness], [Contrast], [Sharpness], [Color level], [Color balance],
[Aspect], [Horizontal position], [Vertical position], [Clock], [Tracking], [Video filter], and [Overscan].
Clearng all the adjustments and settngs [All data]
Reset all the adjustments and settings for all the signals to the factory preset.
All items can be reset EXCEPT [Language], [No signal screen], [Filter message], [Password], [Communication
speed], [Standby mode], [Fan mode], [Remaining lamp time], [Lamp counter], [Filter counter], and [Network set-
tings].
Clearng Networkng Settngs [Network settngs]
Returns [DHCP], [IP ADDRESS], [SUBNET MASK], and [GATEWAY] to the default settings.
Clearng Lamp Hour Meter [Lamp counter]
Resets the lamp clock back to zero. Selecting this option displays submenu for a confirmation. Select [Yes] and
press the OK button.
NOTE:Elapsed time of the lamp use will not be affected even when [Reset] is done from the menu.
NOTE: The projector will turn off and go into standby mode when you continue to use the projector for another 100 hours after
the lamp has reached the end of its life. If this happens, press the INFO button on the remote control for ten seconds to reset
the lamp clock back to zero. Do this only after replacing the lamp.
NOTE: Resetting the lamp counter before or without replacing the lamp will not display the exact lamp usage hours. Using the
lamp beyond its service life may cause the lamp to break. Be sure to reset the lamp counter after replacing the lamp.
Clearng the Flter Usage Hours [Flter counter]
Resets the filter usage back to zero. Selecting this option displays submenu for a confirmation. Select [Yes] and
press the OK button.
NOTE: Elapsed time of the filter use will not be affected even when [Reset] is done from the menu.
66