Canon LV-7370 User Manual page 48

the [Confirm password] screen will be displayed.
NOTE: Do not forget your password. If you forget your password, contact your dealer.
7. Type in the same combination of
the confirmation screen will be displayed.
8. Select [Yes] and press the OK button.
the Password function has been enabled.
To turn on the projector when Password is enabled:
1. Press the Main Power Switch to the On position (I).
2. Press and hold the POWER button for about 1 second.
the projector will be turned on and display a message to the effect that the projector is password-protected.
3. Press the MENU button.
the Password screen will be displayed.
4. Enter your password in the Password screen and press the OK button.
You can view the projected image.
NOTE: The password disable mode is maintained until the main power is turned off (by setting the main power switch to "O"
or unplugging the power cord). Turning off the main power and turning it back on will require password entry.
buttons and press the OK button.
9
. Convenent Features