Image Level Adjustment - Canon LV-5210 Owner's Manual

Computer Input

Image Level Adjustment

1 Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Image Adjust Menu icon.
2 Press the Point Down button to move the red frame pointer to
the item that you want to adjust, and then press the SET button.
The level of each item is displayed. Adjust each level by
pressing the Point Left/Right button.
Contrast
Press the Point Left button to decrease contrast and the Point Right
button to increase contrast. (From 0 to 63.)
Brightness
Press the Point Left button to adjust image darker and the Point Right
button to adjust image brighter. (From 0 to 63.)
Color temp.
Press the Point Left button or the Point Right button for Color
temperature. level that you want to select. (XLow, Low, Mid, or High)
White balance (Red)
Press the Point Left button to lighten red tone and the Point Right
button to deepen red tone. (From 0 to 63.)
White balance (Green)
Press the Point Left button to lighten green tone and the Point Right
button to deepen green tone. (From 0 to 63.)
White balance (Blue)
Press the Point Left button to lighten blue tone and the Point Right
button to deepen blue tone. (From 0 to 63.)
Sharpness
Press the Point Left button to soften the image and the Point Right
button to sharpen the image. (From 0 to 15.)
Gamma
Press the Point Left/Right button to obtain better balance of contrast.
(From 0 to 15.)
Reset
Resets all adjustment to their previous levels.
Store
To store the image data adjusted manually, move the red frame
pointer to the Store icon and press the SET button. The message
"OK?" will appear. Select [Yes] to store manual adjustment.
To set this manual adjustment, select Custom by pressing the IMAGE
button or through the Image Select Menu (p29).
Quit
Closes the Image Adjust Menu.
30
Image Adjust Menu
Image Adjust Menu icon
Move the red frame pointer to
the item to be selected and
then press the SET button.
Selected Image level
Press the Point Left/Right but-
ton to adjust value.
Store icon
Press the SET button at this
icon to store the adjustment.
"OK?" message
Move the pointer to [Yes] and
then press the SET button.