Canon LV-5210 Owner's Manual page 28

Computer Input
Display area
Select the resolution at the Display area dialog box.
Display area H
Adjusts the horizontal area displayed by this projector. Press the
Point Left/Right button to decrease/increase value and then press the
SET button.
Display area V
Adjusts the vertical area displayed by this projector. Press the Point
Left/Right button to decrease/increase value and then press the SET
button.
Full screen
When this function is on, SXGA image is fully displayed at 4 : 3 aspect
ratio. It is displayed at 5 : 4 aspect ratio with this function off.
Reset
Resets all adjustment to their previous levels.
Store
To store adjustment data, move the red frame pointer to the Store
icon and then press the SET button. Move the red arrow pointer to
any of Mode 1 to 5 in which you want to store and then press the
SET button.
Mode free
To clear adjustment data previously set, move the red frame pointer
to the Mode free icon and then press the SET button. Move the red
arrow pointer to the Mode that you want to clear and then press the
SET button.
Quit
Closes the PC Adjust Menu.
NOTE
G
Auto PC Adjust, Display area, Display area (H/V), and Full screen cannot be
selected when "480i", "575i", "480p", "575p", "720p", "1035i", or
"1080i" is selected in the PC System Menu (p25).
28
Press the SET button at the
Display area icon and the
Display
appears.
To store adjustment data
This Mode has parameters being stored.
Vacant Mode shows values of "Total dots,"
"Horizontal," "Vertical,"
"Display area H," and "Display
area V."
To clear adjustment data
closes this dialog box.
area dialog box
Display area