Canon SELPHY ES1 User Manual page 71

Nothing happens when the camera's
The printer has overheated.
Printing is in progress.
Frequent paper jams.
The print receptacle is
overloaded.
The cartridge cover does not close all the way.
The cover lever is down.
"?" instead of the image is displayed on the LCD monitor.
"?" is sometimes displayed
depending on the image.
The image selected on the LCD monitor is not printed.
When the list of images is printed, the index print contains an image displayed as a
white dropped out area.
You tried to print the
following images:
- An image taken with a
different camera or
recorded as a different type
- An image altered by a
computer
- An image with a data size
that is too big
- An image that is corrupted
,
or
Wait for the printer to cool down.
Wait for the printer to finish printing.
Do not load more than 50 sheets of paper into the print
receptacle.
Lift the cover lever again and then close the cartridge
cover.
The image cannot be printed because it is corrupted.
The image has been altered with a computer or has had its
extension changed and may not print correctly.
Check the size of the image you are trying to print and the
number of recorded pixels on the camera, and convert the
image to JPEG compressed type that can be displayed on
the camera. Limit the size of image files to less than 8000
x 6000 pixels.
SET button is pressed.
69