Canon SELPHY ES1 User Manual page 12

Do not exceed the cable and power outlet ratings when operating this product. Do not
operate this product outside of the specified voltage rating. Check that the voltage of the
outlet is compatible with the equipment before plugging it in.
If the power cord becomes damaged (if internal wiring is exposed, etc.), immediately
unplug it from the power outlet.
Be sure that the power cord is plugged all the way in.
Do not damage, modify, or rest heavy objects on the power cord.
Use only recommended power sources.
Remove the power cord on a regular periodic basis and wipe away the dust and dirt that
collects on the plug, the exterior of the power outlet and the surrounding area.
Do not handle the power cord if your hands are wet.
Continued use of the equipment may result in fire or electric shock.
After the battery pack is fully charged and when the compact power adapter is not being
used, disconnect the adapter from both the printer and the power outlet.
Heat will build up and could result in a fire.
The output terminal of the compact power adapter is designed for exclusive use with this
equipment. Do not use the output terminal for other batteries and products.
Heat will build up and could result in fire or electric shock.
Do not place the battery pack near a heat source or expose it to direct flame or heat.
The battery pack should not be immersed in water.
Do not attempt to disassemble, alter or apply heat to the battery pack.
Avoid dropping or subjecting the battery pack to severe impacts that could damage the
casing.
Use only recommended battery pack and accessories.
Use of a battery pack not expressly recommended for this equipment may cause explosions
or leaks, resulting in fire, injury and damage to the surroundings. In the event that a battery
leaks and the eyes, mouth, skin or clothing contact these leaked substances, immediately
flush with water.
Do not place anything, such as tablecloths, carpets, bedding or cushions, on top of the
battery charger while it is charging.
Heat will build up and could result in a fire.
When charging the battery pack, use only the printer. Do not use other equipment.
Heat will build up and could result in fire or electric shock.
Before you discard a battery, cover the terminals with tape or other insulators to prevent
direct contact with other objects.
Contact with the metallic components of other materials in waste containers may lead to fire
or explosions.
10
Power
Battery (Sold Separately)