Install The Ink Tanks - Canon PIXMA iP4700 Series Getting Started

4

Install the Ink Tanks

• Handle the ink tanks carefully. Do not drop or
apply excessive pressure to them.
• If the Top Cover is left open for more than 10
minutes, the Print Head Holder moves to the
right. In this case, close and reopen the Top
Cover.
• Be sure to use the supplied ink tanks.
1
2
Pull the orange tape (1) in the direction of the
arrow to peel off the protective film and remove
the film (2) completely.
1 2
2
A
1
While pressing down with your left thumb, twist off the
orange protective cap (A) located on the bottom of the
ink tank.
• Do not touch the electrical contacts (B) or open ink port (C)
on the ink tank. The printer may not print properly if you touch
them.
• Do not hold the sides of the ink tank; ink may splash.
4
3 5 6
C
B