Telephone Device for the Deaf (TDD) support is available at (1-866-251-3752). 4. Extended Service and Support Canon CarePAK Extended Service Plan is a cost-attractive and easy-to-use extended service program that provides up to three full years of service and support coverage at a very attractive price.
Page 4
Canon PIXMA iP4300 Photo Printer Quick Start Guide. Copyright This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc.
Table of Contents Before Printing...2 Turning the Printer On and Off ...2 Loading Printing Paper ...4 Basic Printing ...19 Printing with Windows...19 Printing with Macintosh...20 Printing Photographs Directly from a Compliant Device ...21 Printing from a PictBridge Compliant Device...21 Routine Maintenance ...26 Replacing an Ink Tank ...26 Keeping the Best Printing Results ...34 When Printing Becomes Faint or Colors...
The POWER lamp flashes green, and changes to steady, non-flashing light. Important If the ALARM lamp begins to flash orange, see “ALARM Lamp Flashes Orange” on page 76. Turn on your computer. Before Printing ® , and in the Canon IJ Printer Printer Driver Guide on-screen manual...
Turning off the Printer To turn off the printer, press the POWER button. When the POWER lamp stops flashing, the printer is turned off. Important About the Power Plug When removing the power plug after turing off the printer, be sure to confirm that the POWER lamp is not lit.
Loading Printing Paper This section describes how to load printing paper in the Auto Sheet Feeder and the Cassette. Paper Handling Recommended Paper and Requirements Media Type Model Plain Paper — Envelopes — High Resolution HR-101N 80 sheets (A4, Letter) Paper Super White SW-201...
Folded, curled, or wrinkled paper Damp paper Paper that is too thin (weighing less than 64 gsm / 17 lb) Paper that is too thick (non-Canon genuine paper weighing more than 105 gsm / 28 lb) Picture postcards Postcards affixed with photos or stickers...
Note that some types of clear plastic folders and albums may cause the edges of the paper to turn yellow. Using Specialty Media Canon recommends that you use Canon genuine media to ensure optimal print quality. Photo Quality Media Glossy Photo Paper...
Using the Auto Sheet Feeder and the Cassette This printer offers two paper sources to load printing paper; the Auto Sheet Feeder, found at the top of the printer, and the Cassette, found at the front of the printer. (A) Auto Sheet Feeder (B) Cassette When Printing for the First Time At purchase, the printer is set to feed from the Auto Sheet Feeder.
Page 12
(A) Load plain paper in the Auto Sheet Feeder. To Change the Paper Source The Auto Sheet Feeder lamp lights up when feeding from the Auto Sheet Feeder, and the Cassette lamp lights up when feeding from the Cassette. Before you print, make sure that the paper source selection matches the paper source where you actually loaded paper.
Page 13
Paper Source Selection Scenarios Deciding on the usage of the two paper sources to print with minimum reloading of paper depends mainly on the variety of the type of paper you use regularly, and also on space limitations of the location you are setting the printer. If you print regularly on photo paper as well as on plain paper If you use photo paper as much as plain paper, you can load photo paper in the Auto Sheet Feeder and plain paper in the Cassette.
Page 14
If you print mainly on plain paper You can load plain paper of the same size in both paper sources, and set the printer driver to automatically switch the paper source when either paper source runs out of paper during printing.
Changing the Paper Source Before printing, confirm that the location where you have loaded paper is selected as the paper source. Press the Paper Feed Switch to change the paper source. Important If Paper Feed Switch is not selected for Paper Source in the printer driver, the Paper Feed Switch on the printer will be disabled when printing.
Note For details on the specialty media Canon provides for use with its various printers, refer to “Printing Media” in the User’s Guide on-screen manual. For detailed instructions on how to load specialty media into the printer, refer to “Printing Media”...
Loading Paper in the Auto Sheet Feeder Flatten the four corners of the paper before loading it. Note Align the edges of paper neatly before loading. Loading paper without aligning the edges may cause paper jams. If paper is curled, hold the opposing curled corners and gently bend them in the opposite direction until the paper becomes completely flat.
Load the paper. (1) Load the paper in the Auto Sheet Feeder with the print side facing UP. (2) Align the paper stack against the Cover Guide on the right side of the Paper Support. Note Make sure that the Cover Guide is set upright when you load paper in the Auto Sheet Feeder.
Page 19
Adjust the size of the Cassette. When loading A5 or larger sized paper (nonstandard-size paper with 8 inches / 203 mm or more in length), extend the Cassette. When loading 5" x 7" or smaller sized paper (nonstandard-size paper with less than 8 inches / 203 mm in length), do not extend the Cassette.
Page 20
Insert the Cassette into the printer. (1) Set the Cover on the Cassette. (2) Insert the Cassette into the printer. Push the Cassette all the way into the printer. If the Cassette has been extended to accommodate larger paper sizes, the front edge of the Cassette will extend beyond the front of the printer.
Loading Envelopes Use either European DL or US Comm. Env. #10-sized envelope. Important Do not use envelopes with embossed or treated surfaces, a double flap, pressure seals, or sticker flaps. Select either DL Env. or Comm. Env. #10 in the printer driver according to the envelope size you are using.
Loading Envelopes in the Cassette Extend the Cassette. See “Adjust the size of the Cassette.” on page 15. Align the envelope stack against the right side of the Cassette. Load with the front face DOWN. The flap of the envelope will appear facing UP on the left side. A maximum of 5 envelopes can be loaded at once.
Create a document or open a file to print using an appropriate application software. Select Print on the application software’s File menu. Make sure that Canon iP4300 is selected, and click Preferences (or Properties). Specify the required settings and click OK.
Create a document or open a file to print using an appropriate application software. Select Page Setup on the application software’s File menu. Confirm that iP4300 is selected in Format for. Select the desired paper size in Paper Size. Click OK.
Printing Photographs Directly from a Compliant Device Printing from a PictBridge Compliant Device You can connect a PictBridge compliant device such as a digital camera, camcorder, or mobile phone and print recorded images directly without using a computer. Note PictBridge is an industry standard enabling a range of digital photo solutions, including the direct printing of photos from a digital still camera, camcorder or mobile phone* without the need to use a computer.
Page 26
Connect the PictBridge compliant device to the printer. Note Depending on the model or brand of your device, you may have to select a print mode compliant with PictBridge before connecting the device. You may also have to turn on the device or select Play mode manually after connecting the device to the printer.
Default setting explained below is applied for the setting item. * In the following description, names of settings items are given according to those used in Canon-brand PictBridge compliant devices. Setting item names may be different depending on the brand or model of your device.
Page 28
*1 Exclusively used to print photo stickers. When printing on sticker paper, select 10x15 cm/4" x 6" in Paper size. *2 Can be selected only on certain Canon-brand PictBridge compatible devices. *3 Plain Paper can be selected for Paper type only when Paper size is set to A4 or 8.5" x 11"...
Page 29
PictBridge printing. To change the settings, you need to install the Canon Setup Utility from the Setup CD-ROM and connect the printer to your computer. For details, refer to the User’s Guide on-screen manual.
Routine Maintenance Replacing an Ink Tank When ink runs out, replace the ink tank. The printer will not print if the wrong type of ink tank is used, or if it is installed in the incorrect position. The printer uses the following ink tanks. Black: CLI-8BK Black: PGI-5BK Yellow: CLI-8Y...
Page 31
Replace the ink tank with a new one immediately. * To confirm the ink tank information, click the Ink Details menu. * You can also display the Canon IJ Status Monitor by clicking the Canon IJ Status Monitor button which appears on the taskbar during printing.
After replacing the tank, close the Top Cover to resume printing. Note When ink is low, the “!” symbol appears above an ink tank with low ink in the Canon IJ Status Monitor. Obtain a replacement tank as soon as possible.
Page 33
Canon IJ Status Monitor will no longer display the remaining ink level. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.
Page 34
Canon IJ Printer Utility will no longer display the remaining ink level. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.
Important Handling Ink To maintain optimal printing quality, we recommend the use of specified Canon brand ink tanks. Refilling ink is not recommended. Once you remove an ink tank, replace it immediately. Do not leave the printer with ink tanks removed.
Page 36
Prepare the replacement tank. (1) Remove the new ink tank from its packaging, then pull the orange tape in the direction of the arrow (A) so that the protective film does not remain on the air hole (B). Then remove the film completely (C).
Page 37
Install the ink tank. (1) Insert the front end of the ink tank into the Print Head. (2) Press on the mark on the ink tank until the ink tank snaps firmly into place. (3) Make sure that the ink lamp lights up red. Important The printer cannot be used unless all the ink tanks are installed.
Keeping the Best Printing Results To avoid drying of the Print Head and clogging of the nozzles, note the following. When You Turn Off the Printer Follow the procedure below to turn off the printer. (1) Press the POWER button to turn off the printer. (2) Confirm that the POWER lamp has gone out.
See “Print Head Deep Cleaning” on page 42. Note If Print Head Deep Cleaning does not resolve the problem, the Print Head may be damaged. Contact your Canon service representative. If the Ruled Lines Are Shifted Step 1 See “Aligning the Print Head” on page 44.
Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles. Note Make sure that the Inner Cover is closed. Printing the Nozzle Check Pattern Without a Computer Nozzle check pattern printing can be performed also from the printer itself using the RESUME/CANCEL button.
Page 41
Extension. Press the Paper Feed Switch to select the paper source in which you loaded the paper. Open the Canon IJ Printer Utility dialog box. Print the Nozzle Check Pattern. (1) Select Test Print in the pop-up menu. (2) Click Nozzle Check.
Examining the Nozzle Check Pattern Examine the nozzle check pattern output by the printer, and clean the Print Head if necessary. Note The nozzle check pattern will not be printed correctly if there is not enough ink. Replace the ink tank if the remaining amount of ink is insufficient.
Print Head Cleaning Clean the Print Head if lines are missing or if white streaks appear in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Note that cleaning the Print Head causes used ink to be absorbed in the ink absorber. Cleaning the Print Head consumes ink, so perform Print Head Cleaning only when necessary.
Page 44
Make sure that the printer is on. Press the Open Button to open the Paper Output Tray and extend the Output Tray Extension. Open the Canon IJ Printer Utility dialog box. Start Print Head Cleaning. (1) Make sure that Cleaning is selected in the pop-up menu.
Page 45
Note The nozzle check pattern will not be printed correctly if there is not enough ink. Replace the ink tank if the remaining amount of ink is insufficient. See “Replacing an Ink Tank” on page 26. Check the print head condition with the printed nozzle check pattern, and take appropriate action.
(2) If the print head nozzles are still not clean, turn off the printer and perform another Print Head Deep Cleaning after 24 hours. (3) If this does not solve the problem, the Print Head may be damaged. Contact your Canon service representative.
Page 47
(2) If the print head nozzles are still not clean, turn off the printer and perform another Print Head Deep Cleaning after 24 hours. (3) If this does not solve the problem, the Print Head may be damaged. Contact your Canon service representative.
Aligning the Print Head If ruled lines are printed misaligned or print results are otherwise unsatisfactory, adjust the print head position. Note Make sure that the Inner Cover is closed. Automatic Print Head Alignment For Automatic Print Head Alignment, follow the procedure below. Note You cannot feed paper from the Cassette when performing Automatic Print Head Alignment.
Page 49
With the printer on, load a sheet of A4 or Letter-sized plain paper in the Auto Sheet Feeder. Press the Open Button to open the Paper Output Tray and extend the Output Tray Extension. Open the Canon IJ Printer Utility dialog box. Routine Maintenance...
Page 50
Print the pattern. (1) Select Test Print in the pop-up menu. (2) Click Print Head Alignment. (3) Read the message and click Print Head Alignment. The print head alignment pattern is printed. Do not open the Top Cover while printing. Printing takes about 4 minutes to complete.
Manual Print Head Alignment If the results of Automatic Print Head Alignment are not satisfactory, follow the procedure below to perform Manual Print Head Alignment to precisely align the Print Head. For details on performing Automatic Print Head Alignment, see on page 44.
Page 52
Look at the printout. From the patterns, select the most even, least irregular patterns for each column and enter their numbers. Click When the confirmation message is displayed, click OK. Important Do not open the Top Cover while printing. Routine Maintenance...
Page 53
In the same way, select the best patterns for each column, enter their numbers, then click Columns G to J are striped vertically and columns K and L are striped horizontally. For Columns K and L, the best patterns will be smooth and have no streaks in the border indicated by the arrows.
Page 54
When the confirmation message is displayed, click OK. Important Do not open the Top Cover while printing. In the same way, select the most even patterns for each column, enter their numbers, then click OK. When the confirmation message is displayed, click OK. Note When you turn off the printer, be sure to press the POWER button on the printer.
Page 55
Press the Paper Feed Switch to select the paper source in which you loaded the paper. Open the Canon IJ Printer Utility dialog box. Select Custom Settings in the pop-up menu. Select the Align heads manually check box, and then click Send.
Page 56
Look at the printout. From the patterns, select the most even, least irregular patterns for each column and enter their numbers. Click Send. When the confirmation message is displayed, click OK. Important Do not open the Top Cover while printing. Routine Maintenance...
Page 57
In the same way, select the best patterns for each column, enter their numbers, then click Send. Columns G to J are striped vertically and columns K and L are striped horizontally. For Columns K and L, the best patterns will be smooth and have no streaks in the border indicated by the arrows.
Page 58
In the same way, select the most even patterns for each column, enter their numbers, then click Send. Note When you turn off the printer, be sure to press the POWER button on the printer. Otherwise, the settings made here will not be saved. Routine Maintenance...
The paper cleans the Paper Feed Rollers as it feeds through the printer. Repeat step 7 three times. If there are no signs of improvement after performing cleaning three times, contact a Canon service representative. Routine Maintenance...
Cleaning the Inside of the Printer If the printed paper is smudged, the inside of the printer may be dirty. To always get best quality printing result, periodical cleaning of the inside of the printer is recommended. You can clean this part in two ways: See “Cleaning with the Printer Driver (Bottom Plate Cleaning)”...
Page 61
Make sure that the printer is turned on, and then remove any paper from the Auto Sheet Feeder. Press the Open Button to open the Paper Output Tray and extend the Output Tray Extension. Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, and then unfold the paper.
Page 62
Load this and only this sheet of paper in the Auto Sheet Feeder with the open side to the front. Open the Canon IJ Printer Utility dialog box. Make sure that Cleaning is selected in the pop-up menu. Click Bottom Plate Cleaning.
Cleaning the Protrusions Inside the Printer If protrusions inside the printer are stained, wipe off any ink from the protrusions using a cotton swab or the like. Important Before cleaning the inner parts, be sure to turn the printer off. Routine Maintenance...
Troubleshooting This section describes troubleshooting tips for problems you may encounter when using the printer. Note If you cannot find appropriate tips for your problem, refer to the on-screen manuals. “Cannot Install the Printer Driver” on page 61 “Cannot Connect to Computer Properly” on page 63 “Printing Speed Is Slow / USB 2.0 Hi-Speed Connection Does Not Work”...
Cannot Install the Printer Driver Cause Unable to proceed beyond the Printer Connection screen. Action If you were unable to proceed beyond the Printer Connection screen, follow the procedure below to reinstall the printer driver. (1)Click Cancel on the Printer Connection screen. (2)Click Start Over on the Installation Failure screen.
Page 66
If the CD-ROM icon is not displayed, restart your computer. If the icon is still not displayed, try different disks and see if they are displayed. If other disks are displayed, there is a problem with the Setup CD-ROM. Contact a Canon service representative.
Cannot Connect to Computer Properly Printing Speed Is Slow / USB 2.0 Hi-Speed Connection Does Not Work Cause Your system environment is not fully compatible with USB 2.0 Hi-Speed. “Hi-Speed USB Device Plugged into non-Hi-Speed USB Hub” or “This Device Can Perform Faster” Message Is Displayed (Windows XP Only) Cause The printer is connected to a computer that does not support USB 2.0 Hi-...
Print Results Not Satisfactory Cannot Print to End of Job Cause Size of the print data is extremely large (Windows XP/Windows 2000 only). Part of the Page Is Not Printed Cause Page Size setting in the printer driver does not match the actual size of the paper loaded in the printer.
Page 69
If the problem is still not resolved after performing Print Head Deep Cleaning twice The Print Head may be damaged. Contact your Canon service representative. For details on how to print the nozzle check pattern, how to clean the Print Head, and how to perform Print Head Deep Cleaning, see “When Printing...
Action When printing data with high color saturation such as photographs or images in deep color, we recommend using Photo Paper Pro or other Canon specialty paper. See “Media Types You Cannot Use” on page 5. Make sure that the Media Type set in the Main sheet of the printer driver (Windows) or the Quality &...
Page 71
Cause Inside of the printer is dirty. Action When performing duplex printing, if the paper size specified in the printer driver does not match the actual size of paper loaded in the paper source, the inside will become stained with ink, causing printed paper to become smudged. Check the page size setting in your application.
Page 72
Maintenance sheet, select the Prevent paper abrasion check box, and then click Send. In the Canon IJ Printer Utility, select Custom Settings in the pop-up menu, select the Prevent paper abrasion check box, and then click Send. When Prevent paper abrasion is selected, the setting is also applied to direct printing from a digital camera.
Printer Does Not Start Cause Ink tank is empty. Ink tank not installed in proper position. Open the Top Cover and check the ink lamps. Ink tank is not installed securely. / Part of the orange tape is remaining. Action Open the Top Cover and check the ink lamps.
The paper cleans the Paper Feed Rollers as it feeds through the printer. (8)Repeat step 7 three times. If there are no signs of improvement after cleaning the rollers three times, contact a Canon service representative.
Page 75
Cause Paper not loaded properly. Paper source selection is inappropriate. Too much plain paper loaded. Action Make sure of the following when you load paper in the printer. When loading two or more sheets of paper, align the edges of the sheets before loading.
If you cannot remove the paper or the paper tears inside the printer, or if the paper jam error continues after removing the paper, contact your Canon service representative. Do not load credit card-sized paper in the landscape orientation.
Page 77
(3)Close the Rear Cover, then turn on the power. Wait until the jammed paper is automatically ejected. If you cannot remove the jammed paper or the paper jam error continues after removing the paper, contact your Canon service representative. Troubleshooting...
Page 78
70 to confirm that you are using the correct paper and are loading it into the printer correctly. If you cannot remove the paper or if the paper tears inside the printer, or if the paper jam error continues after removing the paper, contact your Canon service representative.
Page 79
70 to confirm that you are using the correct paper and are loading it into the printer correctly. If you cannot remove a sheet of paper or a teared piece of paper inside the printer, or if the paper jam error continues after removing the paper, contact your Canon service representative. Troubleshooting...
If the error is still not resolved, the Print Head may be damaged. Contact your Canon service representative. Close Inner Cover, then press the RESUME/CANCEL button on the printer. Do not open or close the Inner Cover while printing is in progress, as this can damage the printer.
Page 81
(You will need to replace a particular part of the printer.) Important Canon recommends that you call for service as soon as this error occurs. Once the ink absorber becomes completely full, printing cannot be performed until the ink absorber is replaced.
5 seconds, and then release it. * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.
(3)Open the File menu and select Properties. (4)Click the Ports tab to confirm the port settings. Make sure that a port named USBnnn (Canon iP4300) (where n is a number) is selected for Print to the following port(s). In Windows Me or Windows 98, click the Details tab and make sure that MPUSBPRNnn (Canon iP4300) is selected for Print to the following port.
(1)Select Print and Fax Preferences from Printer. In Mac OS X v.10.2.8 or 10.3.x, select Edit Printer List from Printer. (2)Check that iP4300 is displayed in the list of printers and that the check box is selected. In Mac OS X v.10.2.8, check that iP4300 is displayed in the Printer List.
Error No.: 1851 Is Displayed Cause Inner Cover was open when you started printing. Error No.: 1856 Is Displayed Cause Inner Cover was opened while printing was in progress. Error No.: 2001 Is Displayed Cause No response from connected digital camera or video camcorder.
If you are using a non-Canon PictBridge compatible camera and not sure how to dismiss the printer error message from the camera, check the status of the ALARM lamp and dismiss the error message. For details on dismissing an error message from the printer, see “ALARM Lamp Flashes Orange”...
Page 87
CANCEL button for at least 5 seconds, and then release it. * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.
Page 88
5 seconds, and then release it. * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any printer malfunction or damage caused by refilled ink tanks.
You can view the on-screen manuals in the following way: To view the on-screen manual, double-click the iP4300 On-screen Manual shortcut icon on the desktop, or click Start > All Programs (or Programs) > Canon iP4300 Manual > iP4300 On- screen Manual.
Specifications Printing resolution (dpi) Print speed * * Based on Canon standard pattern. Print speed may vary depending on system configuration, software, document complexity, print mode and page coverage. Print width Acoustic noise level Operating environment Storage environment Power supply...
Page 91
8" x 10" / 20 x 25 cm (Photo Paper Pro) 4" x 7.1" / 10.1 x 18 cm (Photo Paper Pro) *1 Canon-brand sticker. Printing on this paper is available only when the Layout function on your camera has a 16-up option. See “Recommended Paper and Requirements”...
Page 92
Macintosh File System: Mac OS Extended (Journaled), Mac OS X Extended. Additional System Requirements for On-Screen Manuals Browser: Windows HTML Help Viewer Note: Microsoft Internet Explorer 5.0 or later must be installed. The on-screen manual may not be displayed properly depending on your operating system or Internet Explorer version.
Safety Precautions Please read the safety warnings and cautions provided in this manual to ensure that you use the printer safely. Do not attempt to use the printer in any way not described in this manual. Warning You may cause an electric shock, fire, or damage the printer if you ignore any of these safety precautions. Choosing a location Do not place the printer close to flammable solvents such as alcohol or thinners.
Page 94
Working around the Do not use highly flammable sprays near the printer. printer This could cause a fire or electric shock if the spray comes into contact with electrical components inside the printer. Caution You may cause injury or damage the printer if you ignore any of these safety precautions. Choosing a location Do not install the printer in a location that is unstable or subject to excessive vibration.
Page 95
Print Heads and ink For safety reasons, store Print Heads and ink tanks out of the reach of small children. tanks If a child ingests any ink, consult a doctor immediately. Do not shake Print Heads or ink tanks. Ink may leak out and stain clothing or the surrounding area. Never touch the electrical contacts on a Print Head after printing.
1-516-328-5600 Canon U.S.A., INC. LIMITED WARRANTY --- (USA Only) The limited warranty set forth below is given by Canon U.S.A., Inc. ("Canon USA") with respect to the new or refurbished Canon-brand product ("Product") packaged with this limited warranty, when purchased and used in the United States only.
Page 97
Separate Warranty. Non-Canon brand equipment and software that may be distributed with the Product are sold "as is" and without warranty of any kind by Canon USA, including any implied warranty regarding merchantability or fitness for a particular purpose, and all such warranties are disclaimed.
Page 98
Toll-free live technical support Monday-Saturday (excluding holidays) at 1-800-828-4040 Telephone Device for the Deaf (TDD-1-866-251-3752) Repair or Exchange Service Options: In the event service is required for the Product during the limited warranty period, Canon USA offers two hardware support options: Authorized Service Facility Carry-In / Mail-In Service Canon USA's Carry-In/Mail-In Service provides repair or exchange, at Canon USA's option, through Canon USA's Authorized Service Facility (ASF) network.
31 Safety Precautions 89 Specialty Media 6 Specifications general 86 PictBridge 87 System Requirements 87 Troubleshooting 60 Turning off the Printer 3 Turning on the Printer 2 Users in the U.S.A. Canon U.S.A., Inc. Limited Warranty - U.S. Only...
Need help?
Do you have a question about the Pixma iP4300 Series and is the answer not in the manual?
Questions and answers