Copy Stamp - Canon EOS 10D Instruction Manual

Copy Stamp

You can correct an image by pasting a section copied from another part of the same image to
an unwanted part of the image.
Select the [Tools] menu [Start Stamp tool].
1
The copy stamp window appears.
Click the [100% view] button.
2
The image is displayed in the 100% view.
Display the section you want to correct.
3
Drag the image to display the section you want to correct.
Specify the section to copy.
4
Click the [Select Copy Source] button and then click the section to copy.
To change the copied section, repeat the above procedure.
Specifies the section to copy.
Only functions with [100% view].
The image is displayed at 100%
(actual pixel size). Click the
button again to display the
image in the size that fits to the
window.
You can select the pen type.
With [Brush] selected, the pasted
image's borders simulate a brush.
With [Pencil] selected, the pasted
image's borders are sharp.
Fix the position of copy source.
Undoes the previous action.
Reverts to the original condition
before any corrections were
performed.
Copies the content of the
corrections specified.
Displays the previous image.*
Cancels all settings and closes
the window.
*Functions when you have selected multiple images and the copy stamp windows are displayed.
Correct the image.
5
Click or drag on the section you want to correct on the image. [+] in the window
indicates the copy origin, and [ ] indicates the copy destination.
The copied image is pasted in the position where you dragged.
Click the [OK] button.
6
In step 2, you can double-click on the section you want to correct to display the 100%
view. You can also double-click again to return to the original view.
In step 4, you can also specify the section to copy by holding down the <option> key
and clicking.
For information on shortcut keys, refer to the "Shortcut List" (p.5-3).
Cover/Table of
Contents
Displays the full screen. To
return to the original view,
click this button again.
Introduction
To switch between full
screen display/normal
screen display, press the
< > + <F11> keys on the
keyboard.
Displaying Thumbnail Images 1
Drag the slider left or right,
or click the [ ] / [ ] and Performing Basic Edits
buttons to set the size
in the Main Window
(radius) of the image to be
pasted.
Redoes all the corrections.
Redoes the previous
2
Performing Detailed
correction.
Edits in the Edit
Applies to the image the
Window
content of the corrections
copied.
Displays the next image.*
3
Performing Detailed
Edits in the Edit
Image Window
Applies the settings and Displaying an 4
closes the window.
Image in the Quick
Check Window
5
Reference
Index
1-12