Erasing Unwanted Parts Of An Image (Copy Stamp Function); Saving Editing Results; Saving Editing Content To An Image; Editing Jpeg - Canon EOS-1Ds Mark III Instruction Manual

Erasing Unwanted Parts of an Image (Copy Stamp Function)

You can correct an image by pasting a section copied from another part
of the image to an unwanted part of the image.
1 Follow steps 1 to 3 in "Manually Erasing Dust (Repair
Function)" .
(p.90)
2 Specify the section to be copied.
Click on the section that is to be the copy source while holding
down the <option> key.
To change the section that is to be the copy source, perform the
operation above again.
To fix the position of the copy source, checkmark [Fix Copy
Source position].
3 Correct the image.
Click or drag on the section you want to correct on the image. [
in the window indicates the copy source and [ ] indicates the
copy destination.
The copied image is pasted in the position to which it was
dragged.
For [Pen type], you can select from [Brush] (the pasted image's
borders simulate a brush) and [Pencil] (the pasted image's
borders are sharp).
4
Click the [OK] button to return to the main window.
The [ ] mark (p.97) is displayed on a corrected image.

Saving Editing Results

Saving Editing Content to an Image

All the contents (recipe) adjusted with the tool palette
well as the trimmed range
information can be saved to a JPEG or TIFF image, or to a separate
JPEG or TIFF image.
Select the [File] menu
+ ]
Your adjustments are saved to the image.
(p.78 to p.85)
(p.86) and dust-erasure (p.88 to p.91)
desired item.
Introduction
as
Contents at
a Glance
1
Basic
Operation
2

Advanced

Operation
Advanced 3
Image Editing
and Printing
Processing 4
Large Numbers
of Images
5

Editing JPEG

Images
Reference
Index
91