Canon EOS 10D Software Instructions
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Digital Camera
  5. EOS 10D Digital
  6. Software instructions

Canon EOS 10D Software Instructions

For windows and macintosh
Hide thumbs Also See for EOS 10D:
Table of Contents

Advertisement

Quick Links

See also: Software User Manual , Instruction Manual
Software
INSTRUCTIONS
EOS DIGITAL SOLUTION DISK Ver. 5
Please read these instructions carefully before using
the EOS 10D software.
This guide should be kept in a safe place so that it
can be used for future reference.
Windows
Macintosh
´
English Edition

Advertisement

Chapters

Table of Contents
loading

Related Manuals for Canon EOS 10D

Summary of Contents for Canon EOS 10D

  • Page 1 Software INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver. 5 Please read these instructions carefully before using the EOS 10D software. This guide should be kept in a safe place so that it can be used for future reference. Windows Macintosh ´...
  • Page 2 KIND. The CD-ROM storing the SOFTWARE is warranted only against defective material under normal use for a period of ninety (90) days after purchase from an authorized Canon dealer as evidenced by your sales receipt. Your sole remedy for a defective CD-ROM shall be replacement of the same without charge when returned by you at your expense to your point of purchase and proven to be defective upon inspection.
  • Page 3 Canon, its affiliated corporations and third party licensors under such laws. Nothing contained in Paragraph 1 shall be construed to give Canon any ownership rights in any images, graphics or textual material that you save in connection with the Software.
  • Page 4 Manual Organization, How to Read the ● This manual consists of a chapter for Windows followed by a chapter for Macintosh. ● The information in these instructions is valid for the Windows XP Home Edition/ Professional (referred to hereafter as Windows XP), Windows 2000, Windows Me, Windows 98 Second Edition (referred to hereafter as Windows 98 SE), Mac OS 9.2 and Mac OS X operating systems.

  • Page 5: Operation Flow

    Manual and the Conventions Used Operation Flow Install the software (➞W-3, M-3) Connect the camera to your computer (➞W-9, M-7) To work with the images Start File Viewer Utility (➞W-14, M-12) Display the images (➞W-18, M-16) Process the RAW images (➞W-27, M-25) Save the images (➞W-34, M-32) ●...

  • Page 6: Safety Precautions

    Canon. • Canon makes no warranties for damages resulting from corrupted or lost data due to a mistaken operation or malfunction of the camera, the software, the CompactFlash™ cards (CF cards), personal computers, peripheral devices, or use of non-Canon CF cards.
  • Page 7 Software This section briefly describes the main functions of the software provided on the bundled CD- ROM. ■ EOS DIGITAL SOLUTION DISK File Viewer Utility ● When you connect the camera to your computer with the interface cable, images stored on the CF card in the camera are displayed.
  • Page 8 Software ZoomBrowser EX/PhotoRecord ImageBrowser Macintosh ● When you connect the camera to your computer with the interface cable, images stored on the CF card in the camera are displayed. ● This program displays downloaded images as thumbnail and allow you to sort and organize them by content.
  • Page 9 PDF format manuals providing more detailed explanations of the functions available in ZoomBrowser EX and ImageBrowser are available on the Canon website. For URL addresses*, please see the Canon Customer Support contacts in the Canon Limited Warranty supplied with your camera.

  • Page 10: Computer System Requirements

    Computer System Requirements The software bundled with this product runs on the systems described below. Windows System Requirements Windows XP (Home Edition/Professional) Windows 2000 Professional Windows Me Windows 98 Second Edition PC with one of the above OS preinstalled and a USB port as a standard Computer feature * Upgraded machines not supported.

  • Page 11: Macintosh System Requirements

    Macintosh System Requirements Mac OS 9.0 to 9.2 (Mac OS 9.2 recommended) Mac OS X (version 10.2 recommended) Macintosh computer with one of the above OS installed and a USB port as a standard feature Computer (users of first-generation iMacs require a firmware update. ➞M-70) Power PC Mac OS 9.0 to 9.2 Mac OS X...
  • Page 12 MEMO A-11...

  • Page 13: Table Of Contents

    Windows Where explanations are common to all operating systems, the screens used in the examples are from Windows XP. Installing the Software on Your Computer ... W-3 Installing the Software ... W-4 Installing the Software from the EOS DIGITAL SOLUTION DISK ... W-4 Installing Photoshop Elements 2.0 ...
  • Page 14 Saving Images as an Index File ... W-38 Transferring Images to Retouching Software ... W-40 Specifying the Image Transfer Settings ... W-40 Transferring Images ... W-41 Specifying the Preferences ... W-42 Specifying the Camera Settings ... W-44 Operating the Camera from Your Computer ...

  • Page 15: Installing The Software On Your Computer

    Installing the Software on Your Computer This chapter describes how to install the bundled software.

  • Page 16: Installing The Software

    Installing the Software Installing the Software from the EOS DIGITAL SOLUTION DISK ● The software must be installed using the procedure described below. ● The driver is required for communications between the camera and computer. When you use the SOLUTION DISK software to communicate between the camera and computer, be sure to install the driver appropriate to your operating system.
  • Page 17 Click [Software Installation]. Click the [Next] button. Read all of the Software User License Agreement carefully. If you agree to the terms of the license, click the [Yes] button. Select the folder in which the software will be installed and then click the [Next] button.
  • Page 18 Installing the Software Proceed with the installation as directed by the on-screen messages. When installation has finished, restart your computer. After the restart, remove the SOLUTION DISK from the CD-ROM drive. Plug the interface cable into the computer. ● Plug the cable into the USB port on the computer.
  • Page 19 Even when the camera’s main switch is set to <ON>, operation of the Auto power off function will automatically switch the camera off. To prevent this, set the Auto power off to [Off]. (Refer to “Menu Settings” in the EOS 10D Instructions.) (4) Is there sufficient charge left in the camera battery? ●...

  • Page 20: Installing Photoshop Elements 2.0

    Installing the Software Installing Photoshop Elements 2.0 ● You are required to enter the serial number during Photoshop Elements 2.0 installation. The serial number is shown on the CD-ROM’s label. ● To ensure that you do not lose the serial number, carefully copy the serial number or transfer the serial number sticker into the field below.

  • Page 21: Getting Ready To Work With Images

    Getting Ready to Work with Images This chapter explains how to connect the camera to your computer and how to use a card reader (third-party product).

  • Page 22: Connecting The Camera To Your Computer

    Connecting the Camera to Your Computer Connect the camera to your computer with the interface cable so that they can communicate. You can connect the camera while your computer is running. ● When you connect the camera to your computer, be sure to follow the procedure below.

  • Page 23: About Backing Up (Copying) Images

    ● Use only the dedicated interface cable to connect the camera to your computer. ● Push the plug firmly all the way into the socket. Loose connections can cause faults or malfunctions. ● Connect the camera to the computer directly using the interface cable. The camera and computer may not operate correctly if you connect them via a hub or if you connect to multiple USB devices.

  • Page 24: Inserting A Cf Card Into Your Card Reader

    Inserting a CF Card into Your Card Reader To download images from a CF card directly onto your computer, remove the CF card from your camera and load it into a card reader (third-party product) connected to your computer. Remove the CF card from the camera. Load the card into the card reader.

  • Page 25: Working With Images In File Viewer Utility

    For more information on using File Viewer Utility, refer also to the sources listed below. Readme: Click the [Start] button and select [All Programs] ([Programs] in other versions of Windows) s [Canon Utilities] s [FileViewerUtility xx] (“xx” is the version) s [FileViewerUtility Readme (Web)]. Help: Displayed by clicking the [Help] button in the File Viewer Utility main window.

  • Page 26: Starting File Viewer Utility

    ● Click the [Cancel] button to exit the [Scanners and Cameras Wizard]. Click the [Start] button and select [All Programs] ([Programs] in other versions of Windows) s [Canon Utilities] s [FileViewerUtility xx] s [FileViewerUtility]. ● You can also start File Viewer Utility by double-clicking the [FileViewerUtility] icon on the desktop.
  • Page 27 File Viewer Utility main window Show/Hide Thumbnail Frames button (➞W-23) Menu bar Displays the [File], [Edit], [View], and [Help] menus. Path display Displays the connected camera, drive on your computer and folder. Display Mode list box (➞W-21) Display Size list box (➞W-22) Status bar Comment input box (➞W-26)
  • Page 28 Preferences button (➞W-42) Camera Settings button (➞W-44) IPTC information button * Images shot on an EOS 10D do not support this function. Rotate right 90 degrees button (➞W-25) Enter Image Number input box (➞W-19) Select first Image button (➞W-19) Select Previous Image button (➞W-19)
  • Page 29 Digital Exposure Compensation button (➞W-28) White Balance list box (➞W-29, W-30) Click White Balance button (➞W-31) Color Temp. input box (➞W-30) Color tone list box (➞W-32) * The above window shows all the information at once. In actual use, only the information needed is displayed.

  • Page 30: Displaying Images

    The following images can be displayed in File Viewer Utility. • JPEG images • RAW images shot on a Canon digital camera • TIFF images saved in File Viewer Utility (➞W-34) * Images that cannot be displayed by File Viewer Utility appear as a question mark [?].

  • Page 31: Selecting Images

    Selecting Images Selecting Images with the Mouse Position the mouse cursor over the image and click on it. ● To select multiple images at random, hold down the <Ctrl> key and click the images. ● To select consecutive images, click the first image and then hold down the <Shift>...

  • Page 32: Selecting The Model-Specific Processing Mode

    The RAW image process tool bar is displayed, and when you select the RAW images shot on the EOS 10D, you can process them. When a JPEG image is selected, however, the RAW image process tool bar is grayed out and disabled.

  • Page 33: Selecting The Image Display Mode

    If you double-click on the thumbnail-displayed image, it is displayed in the Preview mode. ● See “Simultaneous Capture in RAW and JPEG Formats” in the EOS 10D Instructions for information about the settings for JPEG images recorded simultaneously with RAW images.

  • Page 34: Selecting The Display Size

    Selecting the Image Display Mode Selecting the Display Size Click the [Display Size] list box and select the display size. The image is displayed in the selected display size. In the Preview mode, the available image sizes are [Large] (100% – pixel-equivalent), [Middle] (50%) and [Small] (25%).

  • Page 35: Showing/Hiding The Information Display Frame Of Thumbnail Images

    Showing/Hiding the Information Display Frame of Thumbnail Images You can hide the information displayed on the frame of the thumbnail images (➞W-21) to display more images in the image display area. Select [Thumbnail display] from the [Display Mode] list box. (➞W-21) Click the [Show/Hide Thumbnail Frames] button.

  • Page 36: Working With Selected Images

    Working with Selected Images Protecting Images You can protect important images to prevent them from being accidentally erased. Click the [Protect] button. The image is protected and the [ for the image. ● Clicking the [Remove protect] button unprotects the image and clears the [ ] icon from the information display frame for the...

  • Page 37: Rotating Images

    Erasing Images Use the procedure below to erase unwanted images from a CF card or your computer. Click the [Erase Image] button. The [Canon Digital Camera] dialog box appears. Click the [OK] button. The image is erased.

  • Page 38: Checking The Image Information And Entering Comments

    Working with Selected Images Checking the Image Information and Entering Comments Shooting information is recorded when images are taken. You can check the shooting information by selecting the image. Also, you can copy shooting information to paste it into another application, and you can add a comment. Image information display area ●...

  • Page 39: Processing Raw Images

    You can also change the modified parameters back to the settings used when the shot was taken. Process the RAW image. ● Select [EOS 10D] from the [Model-specific processing mode] list box. (➞W-20) ● Select the RAW image to be processed. (➞W-19) ●...

  • Page 40: Correcting The Brightness (Digital Exposure Compensation

    Processing RAW Images Correcting the Brightness (Digital Exposure Compensation) You can correct the brightness of an image in the range of +/–2 stops in 0.1-stop increments. Click the [Digital Exposure Compensation] button. The [Digital Exposure Compensation] dialog box appears. Compensate the image brightness. ●...

  • Page 41: Adjusting The White Balance

    Adjusting the White Balance You can adjust the white balance in your RAW images. You can adjust the white balance by selecting a setting in the [White Balance] list box. You can also make fine adjustments to the white balance by using the Click white balance function, which allows you to adjust the white balance by selecting a white area in the image.

  • Page 42: Setting The Color Temperature

    Processing RAW Images Setting the Color Temperature You can set the color temperature to a value between 2800K and 10000K (in 100K increments). Select [color temp] from the [White Balance] list box. Enter a color temperature. ● Enter the color temperature in the [Color Temp] input box.

  • Page 43: Click White Balance Function

    Click White Balance Function This function allows you to automatically adjust the white balance simply by clicking a point in a white part of the image. Click the [Click White Balance] button. When you move the cursor over the image, it changes to the shape of an eyedropper.

  • Page 44: Adjusting The Color In Images

    Processing RAW Images Adjusting the Color in Images Use the procedures below to adjust the color parameters (contrast, color saturation and color tone) in images. You can adjust the color by selecting settings from the respective list boxes. Adjusting the Contrast Select the desired setting from the [Contrast] list box.

  • Page 45: Adjusting The Sharpness

    Adjusting the Sharpness You can adjust the edge sharpness of the image. Select the desired level from the [Sharpness] list box. The selected level is applied to the image. Specifying the Color Space Use the procedure below to change the color space for the image. Select the desired setting from the [Color Space] list box.

  • Page 46: Saving Images

    Saving Images This section explains how to save captured images stored on a CF card onto your computer, how to extract JPEG images from RAW images using a simple procedure and then save the JPEG images onto your computer, and how to save multiple images as an index file on your computer.
  • Page 47 You can specify up to 9 digits for the file number. 10 Specifies the first file number. 11 Images shot on an EOS 10D do not support this function. 12 Images shot on an EOS 10D do not support this function.

  • Page 48: Extracting Jpeg Images From Raw Images

    Extracting JPEG Images from RAW Images When a RAW image is shot on the EOS 10D, a JPEG image is recorded at the same time. You can save the JPEG image included with an EOS 10D RAW image to your computer by extracting the JPEG image from the RAW image.
  • Page 49 The converted image is saved in the same folder as the displayed image. You cannot select this option for images that are saved on a CF card in the camera. This option is only available for images saved on your computer or on a CF card in a card reader. Use this button when you want to specify the folder in which the image will be saved.

  • Page 50: Saving Images As An Index File

    Saving Images Saving Images as an Index File This function combines multiple images into an index image and saves the index on your computer as a single JPEG file. Select images to be saved as an index. (➞W-19) Click the [Save File] button and select [Save Index] from the menu that appears.
  • Page 51 Specify the desired settings and click the [OK] button. The images are saved as an index in the selected folder. Save index file dialog box The converted image is saved in the same folder as the displayed image. You cannot select this option for images that are saved on a CF card in the camera.

  • Page 52: Transferring Images To Retouching Software

    Transferring Images to Retouching Software This section describes how to transfer images displayed in File Viewer Utility to the retouching software and also describes how to make settings for image transfer. ● In order to transfer images, you will need the retouching software such as Adobe Photoshop Elements 2.0.

  • Page 53: Transferring Images

    Transferring Images This section describes how to transfer the images displayed in File Viewer Utility to the retouching software. Although the descriptions given here show how to transfer images to Photoshop Elements 2.0, as an example, you can also transfer images by following the same procedure even if you specify any other retouching software in “Specifying the Image Transfer Settings”...

  • Page 54: Specifying The Preferences

    Specifying the Preferences You can use the procedure below to specify the general settings for File Viewer Utility and the processing method for RAW images. Click the [Preferences] button. The [Preferences] dialog box appears. Select the [General Settings] tab or the [RAW Image Processing settings] tab.
  • Page 55 Name] list box. Select [EOS 10D]. * When images shot on a Canon camera are saved in the selected folder or on a CF card in the connected camera, the camera model is automatically added to the list of camera models.

  • Page 56: Specifying The Camera Settings

    Specifying the Camera Settings Use the procedure described here to apply the owner name and date and time settings to the camera. The owner name, and date and time that were applied on the camera are recorded with the images. You can also format (initialize) CF cards and check the camera properties data and the status of the battery and the CF card.
  • Page 57 Camera Settings dialog box Applies the specified settings, closes the [Camera Settings] dialog box and ends the procedure. The battery level of the camera battery is indicated by [ ] or [ When the camera is connected to a household power source using the DC Coupler Kit (optional), [ ] is...
  • Page 58 Specifying the Camera Settings Setting the Owner’s Name, Date and Time Enter the Owner’s Name. ● Type in the name from your keyboard. You can enter up to 31 characters. Set the Date and Time. ● You can click Date or Time with the mouse and use the [▲] and [▼] buttons to set the Date and Time, or you can enter the desired date and time from the keyboard.

  • Page 59: Operating The Camera From Your Computer

    For more information on using RemoteCapture, refer also to the sources listed below. Readme: Click the [Start] button and select [All Programs] ([Programs] in other versions of Windows) s [Canon Utilities] s [RemoteCapture xx] (“xx” is the version) s [RemoteCapture Readme]. Help: Displayed by clicking the [Help] button in the Save window.

  • Page 60: Starting Remotecapture

    ● Click the [Cancel] button to exit the [Scanners and Cameras Wizard]. Click the [Start] button and select [All Programs] ([Programs] in other versions of Windows) s [Canon Utilities] s [RemoteCapture xx] s [RemoteCapture]. ● RemoteCapture version information is displayed in xx.
  • Page 61 Thumbnail view The [RAW] symbol is displayed for RAW images. Displays thumbnail No symbol is shown for images of the JPEG images. shots taken. Image display area Displays the image selected in the thumbnail view. * The above window shows all the information at once. In actual use, only the information needed is displayed.

  • Page 62: Using Remotecapture

    Using RemoteCapture You can control the camera from your computer and take single-frame shots, timer shots and interval timer shots. The images are automatically saved on your computer. Shots taken with RemoteCapture and saved on your computer can be displayed and image- processed in File Viewer Utility in the same way as images shot with the camera.

  • Page 63: Interval Timer Shooting

    ● With the auto focusing, if the camera cannot focus, you cannot take shots. If you cannot take shots with the auto focusing, focus manually and then take a shot. ● The test-shot images taken with the camera held vertically are displayed in the normal (horizontal) orientation in the test-shot image display area.

  • Page 64: Timer Shooting

    Using RemoteCapture Timer Shooting Use this function to specify the timer delay. Timer shooting shots are then taken after the specified number of seconds. Click [ ] (the Detail setting button) in the Shooting window and select the [Timer shooting] tab. The [Timer shooting] tab sheet in the Detailed Settings window appears.

  • Page 65: Setting Remotecapture

    Setting RemoteCapture This section describes how to make various settings for using RemoteCapture. In the settings, you can specify Default Settings to save images on your computer, and you can also specify Detailed Settings to make shooting settings from your computer remotely. Default Settings Use the procedure below to select the folder in which images will be saved and to specify the file names.
  • Page 66 Setting RemoteCapture You can use this option to take shots when there is no CF card in the camera or when the CF card is full. Saves captured images both on your computer and on the CF card in the camera. Use this field to enter a file name when saving a captured image.

  • Page 67: Detailed Settings

    Detailed Settings You can set shooting settings, such as White Balance and Exposure Compensation, from your computer remotely. ● Before you make detailed settings, be sure to confirm that the camera is ready for shooting. If the camera is not ready for shooting (the lens is not attached, etc.), you cannot make some of the settings.
  • Page 68 Setting RemoteCapture Allows you to specify White Balance. Allows you to perform Exposure Compensation. (Enabled only when Program AE, Shutter-priority AE, Aperture-priority AE or Automatic Depth-priority AE is selected as the shooting mode on the camera.) Allows you to specify Metering Mode. Allows you to specify ISO Speed.

  • Page 69: Downloading Images With The Wia Driver/Twain Driver

    A number of restrictions apply to the WIA Driver. You must read the “WIA Driver Readme” file before using the WIA Driver. Readme: Click the [Start] button and then select [All Programs] ([Programs] on Windows Me) s [Canon Utilities] s [EOS 10D WIA Driver] s [WIA Driver Readme]. ●...

  • Page 70: Downloading Images With The Wia Driver

    Follow the Wizard’s on-screen messages to download JPEG images to the computer. Connect the camera to your computer. (➞W-10) If you are using Windows XP, the [EOS 10D] dialog box appears. Select [Microsoft Scanner and Camera Wizard], and then click the [OK] button. The [Scanner and Camera Wizard] dialog box appears.

  • Page 71: Downloading With Windows Explorer

    Connect the camera to your computer. (➞W-10) If you are using Windows XP, the [EOS 10D] dialog box appears. If you are using Windows Me, the [Scanner and Camera Wizard] dialog box appears. Click the [Cancel] button.

  • Page 72: Downloading With The Wia Twain

    Photoshop Elements 2.0, as an example. Connect the camera to your computer. (➞W-10) If you are using Windows XP, the [EOS 10D] dialog box appears. If you are using Windows Me, the [Scanner and Camera Wizard] dialog box appears.
  • Page 73 Select the [File] menu s [Import] s [WIA-EOS 10D]. The [Get Pictures from] dialog box appears. Double-click the [xxxCANON] folder. ● A number between 100 and 999 is displayed in xxx. Select the image(s) you wish to download and click the [Get Pictures] button.

  • Page 74: Downloading Images With The Twain Driver

    Click the [Start] button and select [Programs] s [Adobe Photoshop Elements 2.0]. Photoshop Elements 2.0 starts up. Select the [File] menu s [Import] s [Canon EOS 10D USB]. The TWAIN Driver starts and the JPEG image saved on the CF card in the camera is displayed.

  • Page 75: Working With Images In Zoombrowser Ex

    Utilities] s [ZoomBrowser EX] s [ZoomBrowser EX README]. Help: Displayed by clicking the [Help] button in the ZoomBrowser EX main window. Software User Guide: View by downloading from the Canon website. See “ZoomBrowser EX/ImageBrowser Software User Guide” (➞A-8) for details. ZoomBrowser EX...

  • Page 76: Starting Zoombrowser Ex

    [Cancel] button to exit the Scanner and Camera Wizard and start ZoomBrowser EX (see “Starting ZoomBrowser EX Using the Icon” (➞W-65).) Select [Canon ZoomBrowser EX] and click the [OK] button. ZoomBrowser EX starts up and the Camera window appears. ●...

  • Page 77: Starting Zoombrowser Ex Using The Icon

    ● You can also start ZoomBrowser EX by clicking the [Start] button and selecting [All Programs] ([Programs] in other versions of Windows) s [Canon Utilities] s [ZoomBrowser EX] s [ZoomBrowser EX]. ZoomBrowser EX starts up and the ZoomBrowser EX main window appears.

  • Page 78: Function Buttons

    Starting ZoomBrowser EX Switches between Zoom mode and Scroll mode for Browser area display. Resizes the images displayed in the Browser area (available when Scroll mode is selected). Resizes the images displayed in the Browser area. If you click the [ ] button and then click the desired image or folder, the image or folder is displayed enlarged.

  • Page 79: Downloading And Saving Images

    Downloading and Saving Images The procedure below describes how to download the images saved on a CF card in the camera or card reader and save those images on your computer. Select the images to be downloaded from the Camera window and click the [Download image] button.
  • Page 80 Downloading and Saving Images Specify the desired settings and click the [OK] button. The images are saved on your computer, the Camera window closes and the ZoomBrowser EX main window opens. The downloaded images are displayed in the ZoomBrowser EX main window. Saves images in the selected folder.

  • Page 81: Printing Images In Photorecord

    Printing Images in PhotoRecord In ZoomBrowser EX, the PhotoRecord window is used to print images. In addition to the printing modes supported in Exif 2.2 (ExifPrint), PhotoRecord also supports layout printing and index printing. Printing Images Select the images to be printed in the ZoomBrowser EX main window or the Camera window.
  • Page 82 Select this option when you want to print on the Canon perforated paper. (This option is not displayed if you are using a printer that does not support printing on perforated paper.)
  • Page 83 Edit the print window and click the [Print] button. The [Print] dialog box appears. PhotoRecord Window Images can be moved by dragging them to the desired position. Changes the image sequence. Menu button Displays the menu options used to edit the window.
  • Page 84 Printing Images in PhotoRecord ● Changing the decorations for the entire page To select your preferred decorative design, open the [Change Page Artwork] dialog box by clicking the [Menu] button and selecting [Change Page Artwork] from the menu that appears. ●...

  • Page 85: Adjusting The Image Quality And Printing (Exif 2.2 Compatible

    Adjusting the Image Quality and Printing (Exif 2.2 compatible) PhotoRecord includes an image quality adjustment function that is compatible with Exif 2.2 (Exif Print). This function allows you to print images with the quality automatically corrected. Open the PhotoRecord window. (➞W-71) Right-click the image to be printed and select [Clip/Correct Photo] from the menu that appears.

  • Page 86: Sending E-Mail With Attached Images

    Sending E-mail with Attached Images Use the procedure below to attach images saved on your computer to e-mail messages and then send the mail. To automatically start your e-mail software from ZoomBrowser EX and send images, your e-mail software must be set as a MAPI client. Refer to the user manuals for your e-mail software for information on MAPI settings.
  • Page 87 Select to send an e-mail message immediately or to save the image and send the mail later and then click the [Finish] button. ● When the [Create a new email] radio button is selected, the e-mail software starts up and the window for sending an e-mail message appears with the image already specified as an attachment.

  • Page 88: Processing Raw Images And Merging Panorama Shots

    Processing RAW Images and Merging Panorama Shots Processing RAW Images with ZoomBrowser EX To process RAW images from ZoomBrowser EX, start up File Viewer Utility. Display an image in the ZoomBrowser EX main window. (➞W-67) Select the RAW image to be processed in the Browser area. Click the [View &...

  • Page 89: Troubleshooting And Uninstallation

    Troubleshooting and Uninstallation This chapter provides a troubleshooting manual and describes the software uninstallation procedures.

  • Page 90: Troubleshooting

    ● Have you installed the EOS 10D WIA Driver or EOS 10D TWAIN Driver? ➞ You cannot install the driver correctly unless the EOS 10D WIA Driver or EOS 10D TWAIN Driver is already installed. Insert the SOLUTION DISK into the CD-ROM drive and install the EOS 10D WIA Driver or EOS 10D TWAIN Driver.
  • Page 91 Disconnect the interface cable and uninstall the driver. (➞W-82) Re-install the driver. (➞W-4) ➞ When the [X], [!] or [?] symbol is displayed beside [EOS 10D], part of the driver is missing or corrupted. Use the following procedure to re-install the driver.
  • Page 92 Connect the camera to your computer with the interface cable and set the camera’s main switch to <ON> (➞W-10) and open [Device Manager] (➞below). Click the plus symbol [+] to the left of [Other devices] or [Unknown devices] and check whether [EOS 10D] or [Canon Digital Camera] is displayed.

  • Page 93: Uninstallation Procedure

    Re-installing the software without first restarting your computer is particularly likely to result in computer malfunctions. Click the [Start] button and select [All Programs] ([Programs] in other versions of Windows) s [Canon Utilities] s [FileViewerUtility xx] s [FileViewerUtility Uninstall]. ●...

  • Page 94: Uninstalling The Driver

    To uninstall the driver, you must first uninstall the WIA Driver or TWAIN Driver, then remove [EOS 10D] from the [Scanners and Cameras Properties] dialog box or the [Scanners and Cameras] dialog box, and then delete the driver settings files.
  • Page 95 Delete [EOS 10D]. ● If you are using Windows XP or Windows Me, select and right-click [EOS 10D] and then select [Delete] from the menu that appears. When the confirmation message appears, click the [Yes] button. ● If you are using Windows 2000 or Windows 98 SE, select [EOS 10D] and click the [Remove] button.
  • Page 96 Uninstallation Procedure ● If [EOS 10D] is displayed when you click the plus symbol [+] to the left of [Imaging devices] or [Other devices], select and right-click [EOS 10D] and select [Uninstall] from the menu that appears. ● When the confirmation message appears, click the [OK] button.
  • Page 97 Deleting the Driver Settings Files Mistakenly deleting the wrong files can cause Windows to malfunction. Check the file names carefully before deleting any files. For Windows XP users: Click the [Start] button and select [Control Panel] s [Appearance and Themes] s the [Folder Options] icon. The [Folder Options] dialog box appears.
  • Page 98 The [Inf] folder may contain multiple pairs of [Oem*] files. Check the contents of the [Oem*.inf] files. ● Double-click an [Oem*.inf] file to display the file contents. Check that [; **** Canon Camera Driver Setup File ****] appears on the first line. ●...
  • Page 99 The [Inf] folder may contain multiple pairs of [Oem*] files. Check the contents of the [Oem*.inf] files. ● Double-click an [Oem*.inf] file to display the file contents. Check that [; **** Canon Camera Driver Setup File ****] appears on the first line. ●...
  • Page 100 Uninstallation Procedure For Windows Me and Windows 98 SE users: Click the [Start] button and select [Settings] s [Control Panel]. Then double-click the [Folder Options] icon. ● Windows 98 SE users should click the [Start] button and select [Settings] s [Folder Options].
  • Page 101 Double-click the [Other] folder in the [INF] folder to open. Delete the [Canon.IncCAP_10D.inf] file if it exists. ● The [Canon.IncCAP_10D.inf] file may not exist depending on your computer system. ● “10D” is displayed in place of the “XXX”. The [INF] folder contains a large number of files. Deleting the wrong files could, at worst, prevent Windows from starting up.

  • Page 102: Uninstalling Photoshop Elements 2.0

    Uninstallation Procedure Uninstalling Photoshop Elements 2.0 ● Before beginning the software uninstallation, close all programs you are using and disconnect the interface cable from your computer. ● Windows XP Professional or Windows 2000 users should log in using computer Administrator privileges. Click the [Start] button and then click [Control Panel] s [Add or Remove Programs].

  • Page 103: Adobe Customer Support

    Adobe Customer Support Adobe Systems Inc. technical support information is available in the PDF file format on the supplied CD-ROM. PDF File Location and Opening Instructions Place the Adobe Photoshop Elements 2.0 CD-ROM in the drive and double-click [My Computer] on the desktop, followed by the [Photosle] CD-ROM icon. The window will show folders with language names.

  • Page 104: Index

    Index Adjusting the Color Color Saturation ... W-32 Color Tone ... W-32 Contrast ... W-32 Adjusting the Image Quality and Printing (Exif Print) ... W-73 Adjusting the White Balance ... W-29 Click White Balance Function ... W-31 Color Temperature ... W-30 Connecting the Camera to Your Computer ...
  • Page 105 TWAIN Driver Main Window ... W-62 ZoomBrowser EX Camera Window ... W-64 ZoomBrowser EX Main Window .. W-65 Specifying the Color Space ... W-33 Starting the Software Starting File Viewer Utility ... W-14 Starting RemoteCapture ... W-48 Starting ZoomBrowser EX ... W-64 System Requirements ...
  • Page 106 MEMO...
  • Page 107 Macintosh Where explanations are common to all operating systems, the screens used in the examples are from Mac OS 9.2. In this chapter, Mac OS 9.2 and Mac OS X are referred to as OS 9 and OS X respectively. Installing the Software on Your Computer ...
  • Page 108 Saving Images as an Index File ... M-36 Transferring Images to Retouching Software ... M-38 Specifying the Image Transfer Settings ... M-38 Transferring Images ... M-39 Specifying the Preferences ... M-40 Specifying the Camera Settings ... M-42 Operating the Camera from Your Computer ...

  • Page 109: Installing The Software On Your Computer

    Installing the Software on Your Computer This chapter describes how to install the bundled software.

  • Page 110: Installing The Software

    ● If you are using OS 9, double-click the SOLUTION DISK icon s the [Mac OS 9] folder s the [Canon EOS Digital Installer] icon to start. ● If you are using OS X, double-click the SOLUTION DISK icon s the [Mac OS X] folder s the [Canon EOS Digital Installer] icon to start.
  • Page 111 Select the software to be installed. ● Click the checkboxes for the software to be installed and then click the [Install] button. Read all of the Software User License Agreement carefully. If you agree to the terms of the license, click the [Agree] button. Select the folder in which the software will be installed and then click the [Choose] button.

  • Page 112: Installing Photoshop Elements 2.0

    Installing the Software Installing Photoshop Elements 2.0 ● You are required to enter the serial number during Photoshop Elements 2.0 installation. The serial number is shown on the CD-ROM’s label. ● To ensure that you do not lose the serial number, carefully copy the serial number or transfer the serial number sticker into the field below.

  • Page 113: Getting Ready To Work With Images

    Getting Ready to Work with Images This chapter explains how to connect the camera to your computer and how to use a card reader (third-party product).

  • Page 114: Connecting The Camera To Your Computer

    Connecting the Camera to Your Computer Connect the camera to your computer with the interface cable so that they can communicate. You can connect the camera while your computer is running. ● When you connect the camera to your computer, be sure to follow the procedure below.

  • Page 115: About Backing Up (Copying) Images

    ● Use only the dedicated interface cable to connect the camera to your computer. ● Push the plug firmly all the way into the socket. Loose connections can cause faults or malfunctions. ● Connect the camera to the computer directly using the interface cable. The camera and computer may not operate correctly if you connect them via a hub or if you connect to multiple USB devices.

  • Page 116: Inserting A Cf Card Into Your Card Reader

    Inserting a CF Card into Your Card Reader To download images from a CF card directly onto your computer, remove the CF card from your camera and load it into a card reader (third-party product) connected to your computer. Remove the CF card from the camera. Load the card into the card reader.

  • Page 117: Working With Images In File Viewer Utility

    ● For more information on using File Viewer Utility, refer also to the sources listed below. ReadMe: Double-click the [Canon Utilities] folder s the [File Viewer Utility] folder s [ReadMe]. File Viewer Utility...

  • Page 118: Starting File Viewer Utility

    Double-click the [Canon File Viewer Utility] icon on the desktop to start. ● You can also start File Viewer Utility by double-clicking the [Canon Utilities] folder s the [File Viewer Utility] folder s the [File Viewer Utility] icon. The File Viewer Utility main window appears.
  • Page 119 File Viewer Utility main window Show/Hide Thumbnail Frames button (➞M-21) Display Mode list box (➞M-19) Display Size list box (➞M-20) Status bar Image display area Comment input box (➞M-24) Show the folder tree (➞M-16) * The above window shows all the information at once. In actual use, only the information needed is displayed.
  • Page 120 Starting File Viewer Utility IPTC information button * Images shot on an EOS 10D do not support this function. Camera Settings button (➞M-42) Preferences button (➞M-40) Rotate left 90 degrees button (➞M-23) Enter Image Number input box (➞M-17) Select first Image button (➞M-17) Select Previous Image button (➞M-17)
  • Page 121 Digital Exposure Compensation button (➞M-26) White Balance list box (➞M-27, M-28) Color Temp. input box (➞M-28) Click White Balance button (➞M-29) Color tone list box (➞M-30) * The above window shows all the information at once. In actual use, only the information needed is displayed.

  • Page 122: Displaying Images

    The following images can be displayed in File Viewer Utility. • JPEG images • RAW images shot on a Canon digital camera • TIFF images saved in File Viewer Utility (➞M-32) * Images that cannot be displayed by File Viewer Utility appear as a question mark [?].

  • Page 123: Selecting Images

    Selecting Images Selecting Images with the Mouse Position the mouse cursor over the image and click on it. ● To select multiple images at random, hold down the <shift> key and click the images. ● To select consecutive images, click the first image and then hold down the <option>...

  • Page 124: Selecting The Model-Specific Processing Mode

    The RAW image process tool bar is displayed, and when you select the RAW images shot on the EOS 10D, you can process them. When a JPEG image is selected, however, the RAW image process tool bar is grayed out and disabled.

  • Page 125: Selecting The Image Display Mode

    If you double-click on the thumbnail-displayed image, it is displayed in the Preview mode. ● See “Simultaneous Capture in RAW and JPEG Formats” in the EOS 10D Instructions for information about the settings for JPEG images recorded simultaneously with RAW images.

  • Page 126: Selecting The Display Size

    Selecting the Image Display Mode Selecting the Display Size Click the [Display Size] list box and select the display size. The image is displayed in the selected display size. In the Preview mode, the available image sizes are [Large] (100% – pixel-equivalent), [Middle] (50%) and [Small] (25%).

  • Page 127: Showing/Hiding The Information Display Frame Of Thumbnail Images

    Showing/Hiding the Information Display Frame of Thumbnail Images You can hide the information displayed on the frame of the thumbnail images (➞M-19) to display more images in the image display area. Select [Thumbnail display] from the [Display Mode] list box. (➞M-19) Click the [Show/Hide Thumbnail Frames] button.

  • Page 128: Working With Selected Images

    Working with Selected Images Protecting Images You can protect important images to prevent them from being accidentally erased. Click the [protect] button. The image is protected and the [ for the image. ● Clicking the [Remove protect] button unprotects the image and clears the [ ] icon from the information display frame for the...

  • Page 129: Rotating Images

    Rotating Images Use the procedure below to rotate a selected image by 90-degree increments left or right. Rotate the image. ● To rotate the image right (clockwise), click the [Rotate right 90 degrees] button. ● To rotate the image left (counterclockwise), click the [Rotate left 90 degrees] button.

  • Page 130: Checking The Image Information And Entering Comments

    Working with Selected Images Checking the Image Information and Entering Comments Shooting information is recorded when images are taken. You can check the shooting information by selecting the image. Also, you can copy shooting information to paste it into another application, and you can add a comment. Image information display area ●...

  • Page 131: Processing Raw Images

    You can also change the modified parameters back to the settings used when the shot was taken. Process the RAW image. ● Select [EOS 10D] from the [Model-specific processing mode] list box. (➞M-18) ● Select the RAW image to be processed. (➞M-17) ●...

  • Page 132: Correcting The Brightness (Digital Exposure Compensation

    Processing RAW Images Correcting the Brightness (Digital Exposure Compensation) You can correct the brightness of an image in the range of +/–2 stops in 0.1-stop increments. Click the [Digital Exposure Compensation] button. The [Digital Exposure Compensation] dialog box appears. Compensate the image brightness. ●...

  • Page 133: Adjusting The White Balance

    Adjusting the White Balance You can adjust the white balance in your RAW images. You can adjust the white balance by selecting a setting in the [White Balance] list box. You can also make fine adjustments to the white balance by using the Click white balance function, which allows you to adjust the white balance by selecting a white area in the image.
  • Page 134 Processing RAW Images Setting the Color Temperature You can set the color temperature to a value between 2800K and 10000K (in 100K increments). Select [color temp] from the [White Balance] list box. Enter a color temperature. ● Enter the color temperature in the [Color Temp] input box.
  • Page 135 Click White Balance Function This function allows you to automatically adjust the white balance simply by clicking a point in a white part of the image. Click the [Click White Balance] button. When you move the cursor over the image, it changes to the shape of an eyedropper.

  • Page 136: Adjusting The Contrast

    Processing RAW Images Adjusting the Color in Images Use the procedures below to adjust the color parameters (contrast, color saturation and color tone) in images. You can adjust the color by selecting settings from the respective list boxes. Adjusting the Contrast Select the desired setting from the [Contrast] list box.

  • Page 137: Adjusting The Sharpness

    Adjusting the Sharpness You can adjust the edge sharpness of the image. Select the desired level from the [Sharpness] list box. The selected level is applied to the image. Specifying the Color Space Use the procedure below to change the color space for the image. Select the desired setting from the [Colorspace] list box.

  • Page 138: Saving Images

    Saving Images This section explains how to save captured images stored on a CF card onto your computer, how to extract JPEG images from RAW images using a simple procedure and then save the JPEG images onto your computer, and how to save multiple images as an index file on your computer.
  • Page 139 You can specify up to 9 digits for the file number. 10 Specifies the first file number. 11 Images shot on an EOS 10D do not support this function. 12 Images shot on an EOS 10D do not support this function.

  • Page 140: Extracting Jpeg Images From Raw Images

    Extracting JPEG Images from RAW Images When a RAW image is shot on the EOS 10D, a JPEG image is recorded at the same time. You can save the JPEG image included with an EOS 10D RAW image to your computer by extracting the JPEG image from the RAW image.
  • Page 141 The converted image is saved in the same folder as the displayed image. You cannot select this option for images that are saved on a CF card in the camera. This option is only available for images saved on your computer or on a CF card in a card reader. Use this button when you want to specify the folder in which the image will be saved.

  • Page 142: Saving Images As An Index File

    Saving Images Saving Images as an Index File This function combines multiple images into an index image and saves the index on your computer as a single JPEG file. Select images to be saved as an index. (➞M-17) Click the [Save File] button and select [Save Index] from the menu that appears.
  • Page 143 Specify the desired settings and click the [OK] button. The images are saved as an index in the selected folder. Save File dialog box The converted image is saved in the same folder as the displayed image. You cannot select this option for images that are saved on a CF card in the camera. This option is only available for images saved on your computer or on a CF card in a card reader.

  • Page 144: Transferring Images To Retouching Software

    Transferring Images to Retouching Software This section describes how to transfer images displayed in File Viewer Utility to the retouching software and also describes how to make settings for image transfer. ● In order to transfer images, you will need the retouching software such as Adobe Photoshop Elements 2.0.

  • Page 145: Transferring Images

    Transferring Images This section describes how to transfer the images displayed in File Viewer Utility to the retouching software. Although the descriptions given here show how to transfer images to Photoshop Elements 2.0, as an example, you can also transfer images by following the same procedure even if you specify any other retouching software in “Specifying the Image Transfer Settings”...

  • Page 146: Specifying The Preferences

    Specifying the Preferences You can use the procedure below to specify the general settings for File Viewer Utility and the processing method for RAW images. Click the [Preferences] button. The [Preferences] dialog box appears. Select the [General Settings] tab or the [RAW Image Processing settings] tab.
  • Page 147 Name] list box. Select [EOS 10D]. * When images shot on a Canon camera are saved in the selected folder or on a CF card in the connected camera, the camera model is automatically added to the list of camera models.

  • Page 148: Specifying The Camera Settings

    To display this dialog box from ImageBrowser, select the [Camera Settings] in the menu that appears by clicking the [SETUP OPTIONS] button in the Camera window, or select the [Canon Camera] menu s [Settings] s [Camera Settings]. The [Camera Settings] dialog box appears. M-42...
  • Page 149 Camera Settings dialog box Basic Settings tab sheet Applies the specified settings, closes the [Camera Settings] dialog box and ends the procedure. The battery level of the camera battery is indicated by [OK] or [LOW]. When the camera is connected to a household power source using the DC Coupler Kit (optional), [AC] is displayed.
  • Page 150 Specifying the Camera Settings Setting the Owner’s Name, Date and Time Enter the Owner’s Name. ● Type in the name from your keyboard. You can enter up to 31 characters. Set the Date and Time. ● Use the mouse to select Date/Time and then use the [c] and [d] buttons ([▲] and [▼] buttons in OS X) to set the date and time, or enter the desired date and time from the keyboard.

  • Page 151: Operating The Camera From Your Computer

    ● For more information on using RemoteCapture, refer also to the sources listed below. ReadMe: Double-click the [Canon Utilities] folder s the [RemoteCapture] folder s [ReadMe]. Help: Displayed by selecting [RemoteCapture Help] in the Help menu.

  • Page 152: Starting Remotecapture

    In OS 9, ImageBrowser starts up and the [Auto Run] dialog box appears. Click the [Cancel] button and select [Quit] from the [File] menu to exit ImageBrowser. Double-click the [Canon Utilities] folder s the [RemoteCapture] folder s [RemoteCapture] to start.
  • Page 153 Thumbnail view The [RAW] symbol is displayed for RAW images. Displays thumbnail No symbol is shown for images of the shots JPEG images. taken. Image display area Displays the image selected in the thumbnail view. * The above window shows all the information at once. In actual use, only the information needed is displayed.

  • Page 154: Using Remotecapture

    Using RemoteCapture You can control the camera from your computer and take single-frame shots, timer shots and interval timer shots. The images are automatically saved on your computer. Shots taken with RemoteCapture and saved on your computer can be displayed and image- processed in File Viewer Utility in the same way as images shot with the camera.

  • Page 155: Interval Timer Shooting

    ● With the auto focusing, if the camera cannot focus, you cannot take shots. If you cannot take shots with the auto focusing, focus manually and then take a shot. ● The test-shot images taken with the camera held vertically are displayed in the normal (horizontal) orientation in the test-shot image display area.

  • Page 156: Timer Shooting

    Using RemoteCapture Timer Shooting Use this function to specify the timer delay. Timer shooting shots are then taken after the specified number of seconds. Select [Timer Shooting] in the [File] menu. The [Timer Shooting] dialog box appears. Enter the timer setting (in seconds) and click the [Start] button. ●...

  • Page 157: Setting Remotecapture

    Setting RemoteCapture This section describes how to make various settings for using RemoteCapture. In the settings, you can specify Default Settings to save images on your computer, and you can also specify Detailed Settings to make shooting settings from your computer remotely. Default Settings Use the procedure below to select the folder in which images will be saved and to specify the file names.
  • Page 158 Setting RemoteCapture You can use this option to take shots when there is no CF card in the camera or when the CF card is full. Saves captured images both on your computer and on the CF card in the camera. Use this field to enter a file name when saving a captured image.

  • Page 159: Detailed Settings

    Detailed Settings You can set shooting settings, such as White Balance and Exposure Compensation, from your computer remotely. ● Before you make detailed settings, be sure to confirm that the camera is ready for shooting. If the camera is not ready for shooting (the lens is not attached, etc.), you cannot make some of the settings.
  • Page 160 Setting RemoteCapture Allows you to specify White Balance. Allows you to perform Exposure Compensation. (Enabled only when Program AE, Shutter-priority AE, Aperture-priority AE or Automatic Depth-priority AE is selected as the shooting mode on the camera.) Allows you to specify Metering Mode. Allows you to specify ISO Speed.

  • Page 161: Working With Images In Imagebrowser

    Double-click the [Canon Utilities] folder s the ReadMe: [ImageBrowser] folder s [ReadMe]. Help: Displayed by selecting [ImageBrowser Help] in the Help menu. Software User Guide: View by downloading from the Canon website. See “ZoomBrowser EX/ImageBrowser Software User Guide” (➞A-8) for details. ImageBrowser...

  • Page 162: Starting Imagebrowser

    The [Communication Settings] dialog box appears. Confirm that [USB Port] is selected in the [Port] list box and that [EOS 10D] is selected in the [Detected Camera] list box, then click the [Set] button. The Camera window and Browser window appear.
  • Page 163 What to Do the Next Time ImageBrowser is Started The automatic processing settings selected previously are displayed in the [ImageBrowser Automation wizard] dialog box. To use these settings unchanged, click the [Start] button. To do nothing, click the [Cancel] button. To change the settings, click the [Settings change] button. When you click the [Settings change] button, the window changes as shown below.

  • Page 164: Starting Imagebrowser Using The Icon

    Starting ImageBrowser Starting ImageBrowser Using the Icon Start up ImageBrowser from the [Canon ImageBrowser] icon. Double-click the [Canon ImageBrowser] icon. ● Double-click the [Canon ImageBrowser] icon on the desktop or the [Canon Utilities] folder saved in the folder specified during installation s the [ImageBrowser] folder s the [ImageBrowser] icon.
  • Page 165 An image of the connected camera or CF card will be displayed here. Sets various camera settings. See “Specifying the Camera Settings” (➞M-42) for information on how to set. Reconnects the camera to your computer. Allows you to select all the images displayed in the Camera window at a time.
  • Page 166 Close the [Settings for USB connection] dialog box. ● Click the close box [ connection] dialog box will close. ImageBrowser will cease to start automatically thereafter. M-60 s [Control Panels] s [Canon ] at the upper left of the dialog box. The [Settings for USB...

  • Page 167: Downloading And Saving Images

    When you click the [CANON CAMERA] button, the [Communication Settings] dialog box may appear. Select [USB Port] from the [Port] list box, and select [EOS 10D] from the [Detected Camera] list box, then click the [Set] button. ● If you are using ImageBrowser for...
  • Page 168 Downloading and Saving Images Type in the folder name. ● Once you have typed in the folder name, leave the folder selected. Select the images you wish to download from the Camera window and click the [DOWNLOAD] button. ● Click a thumbnail to select one of the displayed images. You can select multiple images by holding down the <shift>...

  • Page 169: Printing Images

    Select this option when you want to print on the Canon perforated paper. (This option is not displayed if you are using a printer that does not support printing on perforated paper.)
  • Page 170 Printing Images Click the [Page setup] button. The Page Setup window opens. Set the paper size and orientation, and then click the [OK] button. The page setup window in the [Layout Options] dialog box appears again. Click the [OK] button. The print window appears.

  • Page 171: Print Window

    When the [Custom layout printing] radio button is selected in the [Layout Options] dialog box, you can freely change the size and position of the images for printing. Change the Image Size Drag the border to resize the image. Resets the layout. Rotates the selected image.
  • Page 172 The [Custom layout printing] radio button in the [Layout Options] dialog box allows you to freely change the size and position of the images for printing. The other options allow you to print an index or print onto Canon perforated paper (supported on OS 9 only).

  • Page 173: Adjusting The Image Quality And Printing (Exif 2.2 Compatible

    Adjusting the Image Quality and Printing (Exif 2.2 compatible) ImageBrowser includes an image quality adjustment function that is compatible with Exif 2.2 (Exif Print). This function allows you to print images with the quality automatically corrected. Display the [Preferences] dialog box. ●...

  • Page 174: Processing Raw Images And Merging Panorama Shots

    Processing RAW Images and Merging Panorama Shots Processing RAW Images with ImageBrowser To process RAW images from ImageBrowser, start up File Viewer Utility. Display an image in the browser window. (➞M-61) Select the RAW image to be processed from the Browser area. Click the [File] menu and select [RAW image processing].

  • Page 175: Troubleshooting And Uninstallation

    Troubleshooting and Uninstallation This chapter provides a troubleshooting manual and describes the software uninstallation procedures.

  • Page 176: Troubleshooting

    ➞ Your computer does not supply power to the camera. Connect the DC Coupler Kit (optional) to the camera or load a fully charged battery into the camera before connecting it to your computer. (➞ “Installing and Removing the Battery” in the EOS 10D Instructions.) ●...
  • Page 177 ● Is the preferences file for the software corrupted? ➞ The preferences file for your software may be damaged. Quit all active programs, delete the [Canon CameraCom Pref] file and the preference files for the software you are using from the [Preferences] folder, and then restart the software.

  • Page 178: Uninstallation Procedure

    Drag the folder for the software to be uninstalled to the Trash and empty the Trash. ● When uninstalling ImageBrowser for OS 9, you should also drag [Canon ImageBrowser Auto Launch] from the [Control Panels] to the Trash and empty the Trash.

  • Page 179: Adobe Customer Support

    Adobe Customer Support Adobe Systems Inc. technical support information is available in the PDF file format on the supplied CD-ROM. PDF File Location and Opening Instructions Place the Adobe Photoshop Elements 2.0 CD-ROM in the drive. The window will open automatically and show folders with language names.

  • Page 180: Index

    Index Adjusting Image Quality and Printing (Exif Print) ... M-67 Adjusting the Color Color Saturation ... M-30 Color Tone ... M-30 Contrast ... M-30 Adjusting the White Balance ... M-27 Click White Balance Function ... M-29 Color Temperature ... M-28 Connecting the Camera to Your Computer ...
  • Page 181 MEMO...
  • Page 182 CANON SALES CO., INC. 12-15 Mita, 3-Chome, Minato-ku, Tokyo 108-8011, Japan This Instructions booklet is current as of February 2003. For information on using the camera with system accessories introduced after this date, contact your nearest Canon Service Center. CT1-1242-001 ©...

Table of Contents