Editing String Values - ABB Relion SAM600-IO Operation Manual

1MRK 500 131-UEN Rev. C
IEC17000245 V1 EN-US
Figure 22:
5.1.9.2

Editing string values

1. Activate the setting mode and select a setting.
When editing string values, the cursor moves to the first character.
2.
Press
An on-screen keyboard is shown on the HMI.
IEC15000062 V1 EN-US
Editing can be aborted at any time by pressing
screen keyboard.
3.
Press
Switchgear control unit SAM600-IO
Operation manual
Restoring the previous value
Unicode characters that are not found on the on-screen keyboard can be used if the
string is edited in PCM600. This string can be shown and edited on the HMI but if a
character that is not found on the on-screen keyboard is deleted it cannot be
retrieved using the HMI.
to open the editor.
or to select the edited string and press
© 2017 - 2021 Hitachi Power Grids. All rights reserved
IEC17000245-1-en.vsd
IEC15000062.vsdx
or by using the Cancel button on the on-
or to move the cursor.
Section 5
Using the HMI
AMU0600416 v9
33