1MRK 500 131-UEN Rev. C
IEC13000238 V1 EN-US
Figure 15:
3.
Enter the submenu with
4.
Browse the information with
5.1.6
Adjusting the display contrast
Adjust the display contrast anywhere in the menu structure to obtain optimal readability.
•
To increase the contrast, press simultaneously
•
To decrease the contrast, press simultaneously
Set the parameter ContrastLevel via Main menu /Configuration /HMI /Screen /SCREEN:1 to
permanently change the display contrast.
5.1.7
Navigating in the menu
Navigate the menus and change the display views on the screen with the keypad.
•
To move to the Main menu or default view, press
•
To move up or down in a menu, press
•
To move downwards in the menu tree, press
•
To move upwards in the menu tree, press
•
To enter setting mode, press
•
To leave setting mode without saving, press
5.1.7.1
Menu structure
The Main menu contains main groups which are divided further into more detailed submenus.
Switchgear control unit SAM600-IO
Operation manual
Selecting a submenu
.
and
The display contrast is not stored in any memory if changed using the keys from
local HMI. After an auxiliary power failure, the display contrast is restored to set
value for parameter ContrastLevel.
.
© 2017 - 2021 Hitachi Power Grids. All rights reserved
IEC13000238-1-en.vsdx
.
and
.
and
.
.
or
.
.
.
.
Section 5
Using the HMI
AMU0600410 v7
AMU0600412 v7
AMU0600413 v10
29