Page 2
SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profi ts, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.
BEVERAGE EQUIPMENT WORLDWIDE, SIGNATURE SERIES, SILVER SERIES, SMART WAVE, BUNNSOURCE, DIGITAL BREWER CONTROL, POURING PROFITS, SMART HEAT, THE HORIZONTAL RED LINE, ULTRA, COFFEE AT ITS BEST and TEA AT ITS BEST are trademarks of Bunn-O-Matic Corporation in the United States and/or other countries.
Page 13
04270.0000 01201.0000 11424.0000 * Indicates the part number listed is obsolete with no replacement. FILL BASIN DESCRIPTION * VPR - VPRA ** VPS - VPSA Fitting, Tank Inlet Fill Basin (SST) Fill Basin (SST) Gasket, Tank Inlet Plate, Splash Guard...
Page 16
TANK AND COMPONENTS (Continued) Replacement Part First Type Thermostat VPR VPS P554.80 10784 121206...
Page 17
* Indicates the part number listed is obsolete with no replacement. TANK AND COMPONENTS DESCRIPTION Lead, Elec - Blk 10” Terminal Block to Control Thermostat (VPR-VPS also VPRA-VPSA prior to 1/3/97) Lead, Elec - Blk 10” Terminal Block to Control Thermostat (VPRA-VPSA Effective 1/3/97) Lead, Elec - Blu/Blk 23”...
Page 20
ELECTRICAL AND OPERATING CONTROLS “A” MODELS PRIOR TO 1/3/97 VPR - VPRA P555.60 (Continued) : 65 VPR VPS VPS -VPSA “A” MODELS ONLY P561.50 10784 121206...
Page 21
21003.0066 06064.0000 * Indicates the part number listed is obsolete with no replacement. DESCRIPTION Wiring Harness, 120V (VPR) Wiring Harness, 120V (VPS) Wiring Harness, 240V (VPRA) Wiring Harness, 240V (VPSA) Lead, Elec - Blk 7.5” (Power Light to Top Warmer Switch) (Prior to 1/3/97 on “A”...
Page 25
* Indicates the part number listed is obsolete with no replacement. GALLEY KIT DESCRIPTION Galley Kit (Includes items 1, 2, 3 & 5)(VPR-VPRA) Galley Kit (Includes items 1, 2, 3 & 5)(VPS-VPSA) Galley Rail, SST (One Additional Used On VPS and VPSA Brewers) Screw, Pan Head (SST) 4-40 x .50”...
Need help?
Do you have a question about the VPR and is the answer not in the manual?
Questions and answers