NEC SL1000 Getting Started Manual page 33

SL1000 Getting Started Guide
Program20-07-01
Turn on the Day/Night mode Option.
Default Setting:
 Day/Night modes can not be changed by any telephones.
1. After Log-In to the Programming Mode.
If you already Log-In the programming mode, skip this operation.
2. Dial 20 07 01. Change the Feature Class(1-15) if require.
(Default: all telephones are assigned to Class 1.)
3. Press Mute key to move the cursor to Switch Manual Night Service.
Change the Switch Manual Night Service(0:disable/1:enable) if
requre.
4. Press Hold key to confirm the entry and step to the next option.
5. Press Mute key several times when you are done to return to the
Program Mode.
6. Press Speaker key to save changes and exit from the Programming
Mode.
Assign a key to each mode
Choose a telephone that will be able to change the Day/Night mode.
☞Exit Programming Mode. The keys are set at the telephone itself, not within SL1000 Programming Mode.
Default Setting:
There are no keys set to day/night modes on any of the telephones.
1. At the telephone that you want to be able to change the day/night
mode press Speaker key.
2. Dial service code 851.
3. Press the Programmable Function Key you want to set (its current
setting is shown in LCD display). If the Key is not defined the function,
go to step 5.
4. If the Function Key is already assigned the function but not used,
Press Speaker Key + 852 + Key 7 + 000 + Speaker key to clear the
current setting and go back to step 1 again to set the Function key.
5. Dial 09 followed by the mode number 1 to 8.
1 = Day
2 = Night 1
3 = Mid-Night 1
4 = Rest 1
5 = Day 2
6 = Night 2
7 = Mid-Night 2
8 = Rest 2
☞ If you want to clear the Day/Night mode key, press 00 after Step3 to
clear the function.
6. Repeat Step 3 and 4 for further keys/modes.
Operation
Operation
31
Display shows;
Program Mode
20-07-01 F-Cls1
SW Man NTserv1
20-07-01 F-Cls1
SW Man NTserv1
Display shows;
FRI 28 1:49PM
200
KEY PROGRAM
KEY PROG KEY xx
xxxxxxxxxxxxxxxx
KEY PROG KEY xx
NIGHT SERVICE 0