Canon Color imageCLASS MF9170c Service Manual page 176

Chapter 8
F-8-41
5) Free the cable from the cable guide [1].
F-8-42
6) Disconnect the 3 connectors [1].
F-8-43
7) Remove the cable guide [1].
- 1 screw [2]
- 2 claws [3]
F-8-44
8) Remove the rod [1].
- 1 claw [2]
F-8-45
8-24
9) Fit the rod [1] with the cutoff of the shaft [2] to remove the rod.
10) Remove the holder [1].
- 2 screws [2]
11) Remove the plate [1].
- 1 screw [2]
12) Remove the 4 screws [1]
13) Put the right side of the host machine downward to slide the bottom plate
[1] for about 30mm from the pickup drive unit [2].
F-8-46
F-8-47
F-8-48
F-8-49