Chapter 5
[1]
[2]
F-5-36
5) Move the ADF separation roller unit [1] in the direction of the arrow [A]
to remove it from the ADF upper cover in the direction of the arrow [B].
Do not loose the spring [2] when removing the ADF separation roller unit
[1].
[1]
[1]
[2]
F-5-37
6) Remove the parallel pin [1] and the bushing [2].
5-12
[1]
[3]
[ A ]
[ B ]
7) Fit the groove [1] of the ADF separation roller cover with the projection
[2] of the ADF separation roller shaft to remove the ADF separation roller
shaft [3].
[1]
[2]
[3]
8) Remove the ADF separation roller [1].
5.4.5 Pick-up Motor
5.4.5.1 Before Removing the ADF Pickup Motor
imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Remove the ADF pickup feed unit.(page 5-8)Reference [Removing the
ADF Pickup Feed Unit]
5.4.5.2 Removing the ADF Pickup Motor
imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Disconnect the 3 connectors [1] and free the harness [3] from the harness
guide [2].
[2]
[1]
F-5-38
F-5-39
[1]
F-5-40
0018-9069
0018-9071