Etb Motor; Before Removing The Etb Motor; Removing The Etb Motor - Canon Color imageCLASS MF9170c Service Manual

Chapter 7
F-7-70
2) While pushing the ETB lock lever [1] (2 points at left and right), remove
the ETB unit [2].
Points to Note At Handling
Be careful not to touch the surface of the ETB belt or damage it.
Dirts or small cuts on the belt may cause image faults.
[1]
F-7-71
7-32
[1]
[1]
[2]
When closing the front cover with the ETB unit removed and then and
opening it, the drawer connector [1] faces upward. The drawer connector
facing upward may cause the following symptoms; and therefore, be sure to
put down the 2 drawer connectors [1] if necessary.
- When the toner cartridge is not removed
The shutter of the toner cartridge is opened, resulting in deteriorated
sensitivity of the photosensitive drum.
- When the toner cartridge is removed
The coupling [2] and lock mechanism [3] of the toner cartridge works
together and the toner cartridge cannot be installed.
[3]
[2]
[1]

7.5.5 ETB Motor

7.5.5.1 Before Removing the ETB Motor

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Remove the ETB unit.(page 7-31)Reference [Removing the ETB Unit]

7.5.5.2 Removing the ETB Motor

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Remove the duplex delivery assembly [1].
- 2 screws [2]
2) Remove the ETB right cover [1]
-3 screws [2]
-5 claws [3]
[1]
F-7-72
0019-5795
0019-5798