ELECRAFT K4 Operating Manual page 63

moves the targeted VFO to the frequency marked by the mouse arrow.
Tapping the mouse thumbwheel alternates between VFO A, VFO B, and RIT offset.
Using Panadapter Controls
To change panadapter settings:
• Tap the <DISPLAY> primary function button. This brings up a secondary function button row
comprised of all panadapter controls. In the row above these, three controls will be shown: (1) LCD /
& / EXT select buttons; (2) panadapter A / & / B select buttons; (3) parameter adjustment field.
• If an external monitor is connected, use the LCD / & / EXT buttons (shown below) to specify which
display parameter changes will be applied to ("&" = apply to both).
• Use the A / & / B buttons (shown below) to specify which panadapter display the operation will be
applied to ("&"= apply the operation to both).
• Tap or hold the desired panadapter function (example shown below). Some controls take effect
immediately, such as <CENTER> and <FREEZE>. Others require adjustment using VFO A.