System Set-Up - Mitsubishi Electric ecodan PUHZ-W50VHA2 User Manual

Change Language
The initial language setting is English. If you require to change this, follow the 4 steps below. The instructions in this guide use
English for the annotated displays, whatever language is selected the sequence combination of the buttons will not alter.
1
Normal Display
D E
2
Change Language
G
3 G
Language
English (GB)
G
Language
Spräk VAL
D E
4
Normal Display
Setting day of the week and time
The day and time will run from the day the system is switched on. To change these settings please following instructions.
1
Normal Display
2
D
Mon Tue
C
3
Time
As you hold the C button down, the time (displayed at 1) will increment first in one minute intervals, then in ten minute
intervals, and then in one hour intervals. This works in either direction.
is recovering from a power failure.
function that is not available due to the setting.
At this stage the controller has only been used for basic settings, there are still further functions that require setting-up.
Throughout the system set-up buttons on the controller are referenced by letters and displays by numbers ; this key can be found on page 41
SYSTEM SET -UP
G
Language Language
Deutsch (D) Espanol(E)
G
Language G
French(F)
C
D D D
Wed Thu
Step 3:
Press either of the C buttons
as necessary to set the time.
40
Step 1:
Hold down buttons D and E for 2 seconds.
This activates the controller.
Step 2:
Press button G to scroll through the
languages.
G
Language
Pycck(RU) Step 3:
For each press of button G will move
G
through the 7 available languages. Leave on
Language desired language to proceed.
Italiano(I)
Step 4:
Hold down buttons D and E for 2 seconds.
To return to original screen.
D D
Fri Sat Sun
D
Step 1:
Press either of the C buttons to
start
Step 2:
Press button D to advance
through each day. Once on
current day press C to set time.
Step 4:
Press button E when settings are
complete.
41